2008 Bullitt Mustang Wheels on a 1994 Mustang gt

[evilcw311]

ya sorry i meant 2005 in my head. and i am sorry but i totally disagree with you. american muscle isn't the only wheel manufacturer. and they are designed for mustangs in particular so obviously there wheels will be good for sn95's if you want to pick from 4 different wheel styles.. when i look for rims all i can find is the typical Konig, Enkei,BBS,varrsoen,TSW, etc and every other tuner/domestic rim out there in a +40-+44 offset wich is ideal for a 2005+. all fwd cars and newer rwd cars use this offset. having trouble seeing how theres more rim options for sn95?

Hate to bust your bubble but AM doesn't manufacture wheels. They buy them from Wheel Replicas out of Texas.


This message courtesy of crapatalk!

 

[Bauman_Octane]

Hate to bust your bubble but AM doesn't manufacture wheels. They buy them from Wheel Replicas out of Texas.


This message courtesy of crapatalk!

obviously, does that really matter? and does it really affect the point i am trying to make?
lower numbered offset wheels are much harder to come across. i thought that would be common knowledge.

 

[evilcw311]

obviously, does that really matter? and does it really affect the point i am trying to make?
lower numbered offset wheels are much harder to come across. i thought that would be common knowledge.

And my point was that they don't make wheels!!! Lol

Don't be butt hurt over being taught something new.


This message courtesy of crapatalk!

 

[96blak54]

Ouch!

 

[Bauman_Octane]

And my point was that they don't make wheels!!! Lol

Don't be butt hurt over being taught something new.


This message courtesy of crapatalk!

Really dude? nice attitude:thumbsup:. Typicall forum troll. it's people like you that make me hate the internet. Keep up the positive car comunity attitude!

 

[96blak54]

Oddly, evil actually is very positive around here. Don't take Evils comment seriously, Evil didn't imply any negative. Perhaps his vague descriptive 1st reply could have been A tad more educational than just cramming it in your face...lol. (note the "LOL") Evil is cool. We all cool. Newbys are cool. Lurkers are cool. Potential unbeknowith members are cool.

 

[lutter94]

ya sorry i meant 2005 in my head. and i am sorry but i totally disagree with you. american muscle isn't the only wheel manufacturer. and they are designed for mustangs in particular so obviously there wheels will be good for sn95's if you want to pick from 4 different wheel styles.. when i look for rims all i can find is the typical Konig, Enkei,BBS,varrsoen,TSW, etc and every other tuner/domestic rim out there in a +40-+44 offset wich is ideal for a 2005+. all fwd cars and newer rwd cars use this offset. having trouble seeing how theres more rim options for sn95?

I understand they aren't the only one making wheels, but they have most of the "traditional mustang wheels", and since this thread is about 08 bullitt wheels, they definitely fall into that category. I found a rim style, size, color, etc. All exactly the same, one under 94, the other under 06. Different part numbers, but the offsets were the same. I could not find a different spec, so I called AM. They also stated they couldn't find any differences in the wheels, just that they had different numbers since they had different applications. That's all my point was. Personally I'm not into the tuner wheel look, being more of a traditionalist i guess. So I hadn't frequented any other sites. I know TireRack had more expensive wheels than AM did, so that's why I looked there....

 

[evilcw311]

Really dude? nice attitude:thumbsup:. Typicall forum troll. it's people like you that make me hate the internet. Keep up the positive car comunity attitude!

Oddly, evil actually is very positive around here. Don't take Evils comment seriously, Evil didn't imply any negative. Perhaps his vague descriptive 1st reply could have been A tad more educational than just cramming it in your face...lol. (note the "LOL") Evil is cool. We all cool. Newbys are cool. Lurkers are cool. Potential unbeknowith members are cool.

..............while thinking to himself, he thinks that's trolling......?!?

..........then notices pebble is still in his hand and says............."this grasshopper is not ready........"





This message courtesy of crapatalk!

 

[Bauman_Octane]

I understand they aren't the only one making wheels, but they have most of the "traditional mustang wheels", and since this thread is about 08 bullitt wheels, they definitely fall into that category. I found a rim style, size, color, etc. All exactly the same, one under 94, the other under 06. Different part numbers, but the offsets were the same. I could not find a different spec, so I called AM. They also stated they couldn't find any differences in the wheels, just that they had different numbers since they had different applications. That's all my point was. Personally I'm not into the tuner wheel look, being more of a traditionalist i guess. So I hadn't frequented any other sites. I know TireRack had more expensive wheels than AM did, so that's why I looked there....

ahh i see what your gettin at. ya i was going to suggest to just pick from one of the tuner rims but that all makes sense.i come from abit of a tuner background (unfortunatley) so it reflects in my info and opinions sometimes hahah. Giddy up..

 

[Bauman_Octane]

Oddly, evil actually is very positive around here. Don't take Evils comment seriously, Evil didn't imply any negative. Perhaps his vague descriptive 1st reply could have been A tad more educational than just cramming it in your face...lol. (note the "LOL") Evil is cool. We all cool. Newbys are cool. Lurkers are cool. Potential unbeknowith members are cool.

haha i see. ya i just got think skin, i have absolutley no ties with the internet lol, no facebook or anything and this is the only forum i ever joined.i love cars so much i have no intrest in online crap (excpet while im at work like right now lol). but thought i would make this forum a little place for me on the interweb.