4V in a 98 gt ?

[just a 98 gt]

ok how hard is it to put a 4v motor in a 98 gt i know were a 98 cobra motors at but i dont know exactly what all i need and what needs to me modded like the wire harness ans suck so if someone could enlightin me i really like that

 

[justinschmidt1]

I heard it will drop in but everything else from there is differant.

 

[just a 98 gt]

thats what iv read that it bolts in but idk what else after that

 

[justinschmidt1]

hmm i dont know...maybe some one will chime in that knows

 

[just a 98 gt]

i hope so bc id like to get my car running soon bc i still have to get a tranny were mine f ing broke in 1st lol

 

[Jrgunn5150]

I'm going to take the middle road, and say, search, please. I could list everything, but the question get's asked and beat to death once a month.

Long story short, couple hoses, few wires, and a tune is what you'll need.

 

[just a 98 gt]

iv looked and looked i just want to make sure thats all

 

[Jrgunn5150]

Get it as complete as possible, anything extra will be really obvious once you set it in there. The main thing is to ditch/gut, or find a way to control the IMRC's. Anything else can be handled through your local part's store. A GT Ecu will start and runt he thing even.

 

[just a 98 gt]

i read there is a way to pass the imrc but i dont remember maybe some one knows how iv got the time to do the swap i just want to do it right

 

[Steven]

use a MSD rpm window switch and wire it up to control the IRMC's. Thats the easiest way I know how.

 

[voidfinger]

+1 to V's statement.

Only thing i'm still kinda ? about is the throttle cable / cruise thing... don't know what to do about that.

 

[Steven]

use cobra cables and cruise cables. Pretty straight forward. I would do it but I have a PI and 5 speed sitting right there, and i don't quite feel like bothering with the whole ordeal of the parts, even though i have a complete 93 mark 8 motor sitting at the boneyard i can get.

 

[voidfinger]

use cobra cables and cruise cables. Pretty straight forward. I would do it but I have a PI and 5 speed sitting right there, and i don't quite feel like bothering with the whole ordeal of the parts, even though i have a complete 93 mark 8 motor sitting at the boneyard i can get.

how much they want for it V? its pretty close and i'm looking for a 4v... if you don't mind

 

[Steven]

use cobra cables and cruise cables. Pretty straight forward. I would do it but I have a PI and 5 speed sitting right there, and i don't quite feel like bothering with the whole ordeal of the parts, even though i have a complete 93 mark 8 motor sitting at the boneyard i can get.

how much they want for it V? its pretty close and i'm looking for a 4v... if you don't mind

it's basically mine if i want it. Friend of ours owns it and gave it to me. I didnt take it though at the time, no truck

 

[voidfinger]

well what do you want for it then :coolsmiley:

 

[Steven]

i'll think on it.

 

[voidfinger]

you do that lol. when you thunk pm me lol.