adding power along with bling????

[g36 monkey]

[/URL][/IMG]

pi motor from an 02 with trick flow valve covers and some other polt ons...with hi teach cames pulls 281whp and 300wtq....and the bling would be the sound the cams give...saweeeeeeeeeeeeeeeet..........

Do something about those wires!! lol

 

[dutch2081]

what do you suggest? eliminate them?? lol remember there is 8 of them

 

[g36 monkey]

Clean them up. They look so jumbled there in front of the intake. Just get some nice separators, or do the trick I am fond of.

Take a zip tie, wrap it around the whole lot, then put a zip tie between each one as a separator. It looks quite nice and you can use it on any wire/vacuum hose. Not to mention you can get crazy with color coordinating, etc.

 

[dutch2081]

ya that was an old pic.....here is how it looks now after the no2 install....little better with the wires but still not happy i m missing that bracket for the alt..

 

[Ferocious]

Polished supercharger is a good idea.
This car was parked next to me last weekend and it got a lot of looks.

If you want to clean it up a bit and do a PI swap, here's what you can do.

Paint the new valve covers

Paint the intake manifold like slow90coupe did on his

And here's some more stuff that you can probably do in the future to clean it up

 

[Gregor185]

Good ideas ferocious

 

[Tony]

[MENTION=15502]Ferocious[/MENTION] i did a couple of those.

 

[Ferocious]

Hmmm. I hadn't seen your engine in a while.


A PI swap with a cop conversion and battery relocation would probably make that thing instantly stand out.

 

[rz5.0]

I would relocate the coil packs to the rear on the fire wall.. That cleans it up allot..

 

[Walking Tall]

Nothing sticks out like a polished blower. Looks, sound, power. You'd have it all!

 

[MustangChris]

t-dog:

#1)
you can paint your heads.

#2)
you can add chrome valve covers (be sure to count the number of mounting holes on whatever heads you end up using)
http://www.americanmuscle.com/bbk-valvecovers-chrome-v8pass1.html

#3)
you can powder-coat your headers while the heads are out. (they have a shiny powder-coat similar to chrome)

#4
you can powder coat your intake manifold cross-over.

#5
you can buy a chrome/polished throttle body and plenum
http://www.dragonperformance.net/catalog.htm

thats about it when swapping heads on a 2v, brotha.

 

[MustangChris]

i still think you need an optima battery hold down. btw.

 

[LilRoush]

Polished Bullitt intake. Bling + Power.

 

[cobraracer46]

Doing a PI swap with a Bullitt intake would add some show with the go.

 

[Tony]

Doing a PI swap with a Bullitt intake would add some show with the go.

what intake is that? also is that all upper intake, lol? or is it an intake plus a plenum. i'm gay..i dont know

 

[Musturd]

Bullit amazing intake for pi swap

 

[belber095]

Termi swap with a polished Kenne bell............

tapatalkin'

 

[Tony]

with pi heads and intake...can i just pick any intake for a pi motor? i've seen some pretty nasty ones.

 

[Ferocious]

what intake is that? also is that all upper intake, lol? or is it an intake plus a plenum. i'm gay..i dont know

That's a bullit intake manifold + upper plenum + throttle body.
However, I do believe you need PI heads for this intake to work.
Trick flow makes a similar setup for 2v's.

with pi heads and intake...can i just pick any intake for a pi motor? i've seen some pretty nasty ones.

Yes. And PI heads will give you more options.

 

[Tony]

That's a bullit intake manifold + upper plenum + throttle body.
However, I do believe you need PI heads for this intake to work.
Trick flow makes a similar setup for 2v's.



Yes. And PI heads will give you more options.

ok, i kinda thought so but was'nt sure..thanks steven