AFPR, EGR, and Vacuum lines

[Matts50]

I will try to make this coherent, but I am looking for some close-up pictures of everyone's AFPR and nearby vacuum lines.

I have a TFS Street Heat Intake with an elbow that has 2 small vacuum ports. I have a red vacuum line and green vacuum line, both, with black boots, that I have plugged into those 2 small vacuum ports.

Now, the AFPR rubber line is hooked into the vacuum port of the EGR. This doesn't make sense to me!

Am I wrong or should I connect one of the vacuum boots to the EGR and the AFPR to the intake elbow?

Hope this makes sense!

Thanks,
Matt

 

[Matts50]

11 views.....I didn't think it was a difficult question. Did I not word it correctly? I'm looking for some close-up pics of the area where your AFPR is so i can see if I have my vacuum lines routed properly.

Thanks!

 

[Farr94gt]

I had a similar problem, the green line goes to the EGR and the red plugs into the back of the upper intake along with the rubber hose

 

[OnyxCobra]

the green does go to EGR but the red one should go to the 3 hose vac tree at the intake elbow, green line should be one of them, one should be a big hose coming from the drivers side and the other small one should go tot he FPR.