another problem.... just what i need

[MuscleInc1320]

so the other night after work i got in my car and press the clutch and it feels like a shuttering/pulsating vibration as i press and release the clutch. at first i thought maybe the clutch cable was to tight so today i loosen it but still the same problem. honestly i have no idea what the problem is...hopefully someone else has had this problem and could help me out. oh just to mention its an adjustable steeda clutch cable.

 

[Slinger]

Does it make a squealing noise too?it could be your release bearing

 

[Dysfunction]

Well unfortunately if it is clutch related it can only be so many things.. Throwout bearing, clutch, flywheel.. Is the transmission engaging alright?

 

[MuscleInc1320]

the clutch is only a year old and the throw out bearing is good....no squealing noise. plus it spins freely

 

[Javi]

TOB and/or retainer.

 

[ivan12]

Maybe the prongs on the pressure plate, I had a similar problem, buy my clutch was gone and they played around with the pressure plate. Hard to tell

 

[MuscleInc1320]

what could go wrong with the metal fingerthings on the pressure plate that would cause this problem?

 

[ivan12]

Different loads of pressure on the clutch, grab a haynes or chiltons manual and it'll show you a couple of examples

 

[dsg gts]

i had the same thing happen to my 95. the clutch fork has small fingers on it that hold on the pivot ball.one of the fingers broke off. i got a new one from lmr.put it in. end of problem.

 

[MuscleInc1320]

its weird tho cuz the problem just randomly happened. it honestly feels like the clutch cable is getting hung up on something. tomorrow i am going to re route it and see how that goes.