Cam suggestion

[ride351]

I have been waiting for a steeda 19 cam but I cannot find one as they have been out of stock for a while. I am looking for a cam suggestion for my about to be modified pony. she is mostly a fun street machine, but she might make it to the tracks (drag and SCCA) a few times Here are the Mods....

Ported upper and lower 95 cobra intake
gt40 heads off of a 95 cobra that have had work done (light milling and polishing and smoothing out the rough spots)
24 lbs injectors
K&N
pulleys
exhaust
gears 3.73

1.7 cobra RR

cam TBD

the car will be tuned

anything will be greatly appreciated!

 

[ga94gt]

So far I like my #19 but. If i were to by another OTS cam I would go with Anderson Ford. TFS stage 1 is good choice.

 

[sbr420a]

i had an e cam and i was one of the fortunate that didnt have a problem with it. but i am going to a tfs 2 cam

 

[Addermk2]

Comp Cams XE276HR

would be TITS in your motor

 

[LAFENATU]

Do you still have the stock springs on your heads? Your gonna want to replace the springs if you get a cam that has more than .500 lift.

 

[2slo95fiveoh]

Here are some specs and prices:
(All specs are: Intake/Exhaust)
TFS1: $165
Duration- 221/225
Lift- 499/510

Steeda #19: $200
Duration- 220/226
Lift- 480/480

Ford Racing "E" cam: $210
Duration- 220/220
Lift- 498/498

Comp Cams (2 similar, only difference Duration)
$265
Duration- 212/218 or 218/224
Lift- 512/512

All would be good solutions.

 

[Addermk2]

Here are some specs and prices:
(All specs are: Intake/Exhaust)
TFS1: $165
Duration- 221/225
Lift- 499/510

Steeda #19: $200
Duration- 220/226
Lift- 480/480

Ford Racing "E" cam: $210
Duration- 220/220
Lift- 498/498

Comp Cams (2 similar, only difference Duration)
$265
Duration- 212/218 or 218/224
Lift- 512/512

All would be good solutions.

both of the comp cams you listed are HORRIBLE recommendations, so is the E cam

XE276HR
300+ rwhp, here you come

 

[2slo95fiveoh]

Sorry, I was just going with Cams with Similar numbers to compare too.
The XE276HR Cam sounds like it would be quite fun with
Duration- 276/282
Lift- 544/544
$300

But the initial post said he was looking into the Steeda #19, so i was just posting the more common similar choices.
Those lift numbers put it in a little more "aggressive" category, but i don't doubt that it will produce power and sound great too.

 

[LAFENATU]

Here are 2 cams designed for use with the 1.7 Rocker that have not been listed.

Crane 2031

214/220 @.050 .513/.529 112 LSA


AFM B21

218/226 @ 050 .542/.542 112 LSA

 

[sbr420a]

and you can got to like a .530 lift with stock springs

 

[Addermk2]

and you can got to like a .530 lift with stock springs

that would be pretty damn stupid. The stock springs are barely enough for the stock cam

 

[hotrodheath]

the crane 2031!! i have it in my car. awesome sound and power. i am really happy with it. my car has explorer style gt40 intake. gt40 heads with a little port work. bbk long tubes through h pipe with borla mufflers. this is an awesome cam!

 

[LAFENATU]

I have had a 2031 in 2 cars with great results.

The cam pushes hard on the exhaust side which 302 heads need.

 

[sbr420a]

and you can got to like a .530 lift with stock springs

that would be pretty damn stupid. The stock springs are barely enough for the stock cam

did not say it was smart just feasable. they spings can hold up to a .540 lift.

 

[5.0kid]

i really liked the trickflow one when i had it, still have it if you're interested with less than 1400 miles on it.

 

[LAFENATU]

i really liked the trickflow one when i had it, still have it if you're interested with less than 1400 miles on it.

Problem is he has 1.7 rockers...in order for him to clear with that cam he is most likely going to need 1.6 rockers.

 

[sbr420a]

i really liked the trickflow one when i had it, still have it if you're interested with less than 1400 miles on it.

Problem is he has 1.7 rockers...in order for him to clear with that cam he is most likely going to need 1.6 rockers.

unless he was to buy spings then he should be ok

 

[ride351]

Thanks for all of the feedback guys. I have upgraded the springs (i was in there, why not)