Cam ?

MustangJunkie · Nov 26, 2010

just pick up the pi heads and intake. So one cam shaft spun the gear off. could cams on the non pi heads work?

Naptown_Stang · Nov 26, 2010

Yes! they work rather well and supply a nice power upgrade. People report 13-16rwhp gain. Im selling PI cams now but it looks like you have some.

Here are some articles you may wana check out

http://sn95forums.com/index.php?topic=116.0

MustangJunkie · Nov 27, 2010

Naptown_Stang said:
Yes! they work rather well and supply a nice power upgrade. People report 13-16rwhp gain. Im selling PI cams now but it looks like you have some.

Here are some articles you may wana check out

http://sn95forums.com/index.php?topic=116.0

dont know if u understand me. i have pi heads,pi intake,with the cams. but the cam on the driver side spun the gear off. so could i use non-pi cams on the pi heads,and pi intake?

GrnGt · Nov 27, 2010

They should work, npi has less lift than pi does

MadStang · Nov 27, 2010

MustangJunkie said:
Naptown_Stang said:

Yes! they work rather well and supply a nice power upgrade. People report 13-16rwhp gain. Im selling PI cams now but it looks like you have some.

Here are some articles you may wana check out

http://sn95forums.com/index.php?topic=116.0

Click to expand...

dont know if u understand me. i have pi heads,pi intake,with the cams. but the cam on the driver side spun the gear off. so could i use non-pi cams on the pi heads,and pi intake?

I believe so but you're going to lose power since the NPI's are less aggressive.

GrnGt · Nov 27, 2010

Not necessarily true, from what Ive been reading p.i. Heads don't flow very well above .450 lift and the lift on the npi cams is .461/.466 while the pi is .504/.566

duff daddy · Nov 27, 2010

I need pictures of what you did, im lost.

GrnGt · Nov 27, 2010

Cause if they are windsor they press back on.

Ninety8stang · Nov 27, 2010

As duffy said lets see some pictures of what happened...

GrnGt · Nov 28, 2010

Regardless Im curios of how the npi cams would perform in p.i. Heads. I don't know a whole lot about cams but from what I was reading it seemed like the npi cams would work better.

duff daddy · Nov 28, 2010

I personally dont know anyone who has tried npi cams ith pi heads. Call nick at MHS tell him duffy sent you, and he may have an answer or seen a car with this set up.

vermilion · Nov 28, 2010

might have valve float with npi cams.

MustangJunkie · Nov 28, 2010

grn gt is rite i believe about being pressed on. ive heard that 99-00 where pressed on. but i will get pics soon. but dont know a whole bunch about what happened i got them from my cousin and he had bought the whole motor out of a junkyard and didnt need the heads