check this out
- Thread starter Cali95gt
- Start date
roushinator
New Member
- Joined
- May 8, 2007
- Messages
- 82
- Reaction score
- 1
I have seen them but dont know much about them.
castine917
Well-Known Member
he posted on corral pm for info in 2008 and i just posted he should post info on there.
the $1600 price appears to just be to get the company selling to get a name out but this the first i have heard of them.
the $1600 price appears to just be to get the company selling to get a name out but this the first i have heard of them.
i don't see this as a very good design system.
"Tuning package available - including injectors, MAF and fuel pumps! Installation of this kit is fairly straight forward. You will need to relocate or delete the ABS module, add spacers to the sway bar, remove the smog pump and modify the radiator support (for air filter clearance"
first, there is no support to your fuel system, you will have to add that to your cost. relocating your abs is not straight foward. adding spacers to your sway bar, is a sign of a very good design
modify your rad support, thats the killer right there for me. honestly i would save your 1600 for something better.
"Tuning package available - including injectors, MAF and fuel pumps! Installation of this kit is fairly straight forward. You will need to relocate or delete the ABS module, add spacers to the sway bar, remove the smog pump and modify the radiator support (for air filter clearance"
first, there is no support to your fuel system, you will have to add that to your cost. relocating your abs is not straight foward. adding spacers to your sway bar, is a sign of a very good design
modify your rad support, thats the killer right there for me. honestly i would save your 1600 for something better.Spend the extra $1000 and get a PROVEN kit.
B&G STAGE 1 1994-1995
Starting at: $2,750.00
!!!!!!!!!!TAX TIME SALE!!!!!!!!!!FREE SHIPPING !!!!!!!!!!!!!! MUST BE ORDERED ON LINE TO GET THESE PRICES!!!!!!!!!!!!!!!!
B&G'S gen 4 kit It can not get any better!!
It now comes standard with a Master power T-70
Requires slight triming of the hole infront of the passside strut tower. (mostly just opening up the hole slightly) Is to be used with energey suspension mounts. Keeps all accessories (except smog) We have put great effort into making a great fitting kit that only needs to be built once, it is guarnteed to fit your mustang without you having to rebuild it just to get it to work. As long as your mustangs frame rails are where they supposed to be, I guarntee this kit to fit. No more cutting up your whole inner fenderwell just to get a ill fitting kit to work. WILL NOT WORK WITH CONVERTABLE STYLE MOUNTS!!!! If you want to run convertable style mounts you will have to cut on the car, or run spacers!!!!!
Will Fit up to a t-78. 94-95 5.0 KIT Hotside Comes with:
1. Drivers side, 16 Guage mild steel header with 1/2 flanges. 38 MM wg flange installed. Machined V-band flange (not that pressed junk others offer).
2. Passengerside, 16 Guage mild steel header with 1/2 flanges. Machined V-band flange (not that pressed junk others offer).
3. 16 guage mild steel crossover, with stainless flex joint, machined vband flanges.
4. 14 guage mild steel mandrel bent 3.5 downpipe.
5. Kit comes with your choice of turbo see selections below or call for pricing.
6. 38 MM Silver B&G or Turbo Concepts Wastegate standard. Any bar up to 1 Bar. (higher available at higher cost.)
7. 1- Turbo outlet stainless v-band clamp
Cold side comes with:
1. VS Racing INTERCOOLER, 600,750, 825 Precision units available upon request.
2. 2.5" turbo to I/C cold side pipe, with BOV flange installed.
3. 3" Intercooler to throttle body cold side pipe.
4. 50MM B&G/TC B.O.V
COLD SIDE SILICONE KIT INCLUDES:
1. 2- 3" hts couplers
2. 2- 2.5 to 2.5 coupler
3. 4- 3" stainless band clamps
4. 4- 2.5" stainless band clamps
5.2- 2.5" stainless v-band clamps
OIL LINE KIT INCLUDES
Full oil line kit, all -an fittings Braided lines.
Comes with:
1. Turbo drain flange
2. Oil Pan Bung
3. -10 Oil drain line (Braided stainless steel with -an fittings on both ends.)
4. -4 Oil pressure line (Braided stainless steel with -an fittings on both ends.)
5. Turbo oil pressure inlet fitting.
6. Block fitting.
B&G STAGE 1 1994-1995
Starting at: $2,750.00
!!!!!!!!!!TAX TIME SALE!!!!!!!!!!FREE SHIPPING !!!!!!!!!!!!!! MUST BE ORDERED ON LINE TO GET THESE PRICES!!!!!!!!!!!!!!!!
B&G'S gen 4 kit It can not get any better!!
It now comes standard with a Master power T-70
Requires slight triming of the hole infront of the passside strut tower. (mostly just opening up the hole slightly) Is to be used with energey suspension mounts. Keeps all accessories (except smog) We have put great effort into making a great fitting kit that only needs to be built once, it is guarnteed to fit your mustang without you having to rebuild it just to get it to work. As long as your mustangs frame rails are where they supposed to be, I guarntee this kit to fit. No more cutting up your whole inner fenderwell just to get a ill fitting kit to work. WILL NOT WORK WITH CONVERTABLE STYLE MOUNTS!!!! If you want to run convertable style mounts you will have to cut on the car, or run spacers!!!!!
Will Fit up to a t-78. 94-95 5.0 KIT Hotside Comes with:
1. Drivers side, 16 Guage mild steel header with 1/2 flanges. 38 MM wg flange installed. Machined V-band flange (not that pressed junk others offer).
2. Passengerside, 16 Guage mild steel header with 1/2 flanges. Machined V-band flange (not that pressed junk others offer).
3. 16 guage mild steel crossover, with stainless flex joint, machined vband flanges.
4. 14 guage mild steel mandrel bent 3.5 downpipe.
5. Kit comes with your choice of turbo see selections below or call for pricing.
6. 38 MM Silver B&G or Turbo Concepts Wastegate standard. Any bar up to 1 Bar. (higher available at higher cost.)
7. 1- Turbo outlet stainless v-band clamp
Cold side comes with:
1. VS Racing INTERCOOLER, 600,750, 825 Precision units available upon request.
2. 2.5" turbo to I/C cold side pipe, with BOV flange installed.
3. 3" Intercooler to throttle body cold side pipe.
4. 50MM B&G/TC B.O.V
COLD SIDE SILICONE KIT INCLUDES:
1. 2- 3" hts couplers
2. 2- 2.5 to 2.5 coupler
3. 4- 3" stainless band clamps
4. 4- 2.5" stainless band clamps
5.2- 2.5" stainless v-band clamps
OIL LINE KIT INCLUDES
Full oil line kit, all -an fittings Braided lines.
Comes with:
1. Turbo drain flange
2. Oil Pan Bung
3. -10 Oil drain line (Braided stainless steel with -an fittings on both ends.)
4. -4 Oil pressure line (Braided stainless steel with -an fittings on both ends.)
5. Turbo oil pressure inlet fitting.
6. Block fitting.
true again. i checked out that one. its just that i will be getting my financial aide check pretty soon for school and its about 1200. i just wish some had it already so i could know what were the bad parts. but if i do get it i could just custom fab some things
Similar threads
