curious about your numbers

[Mntlkase]

I'm curious to know what kind of power people are making on their STOCK 302 LONGBLOCK with bolt-ons. I'm not including forced induction. But all-motor, stock longblock setups with just bolt ons. Post your numbers using educated reasonable estimates/dyno read-outs....

 

[Addermk2]

94 cobra, stock long block
bbk equal length shorties, BBK X-Pipe (O/R), Mac Pro Dumps
Underdrive pulleys, 70mm TB, CAI
Short-belted (no A/C or Smog)

253rwhp/294wtq pre-tune, 15:1 at wot.... not good
276rwhp/310+(dont remember exact) after tuning

 

[Pure84GTT]

with E7's you'll never crack 270whp

 

[Mntlkase]

My goal is somewhat conservative. Id like to keep my new longblock I just ordered stock, but still put down 250whp. Im figuring with that power, and some quality suspension\tire mods I shouldn't have a problem cracking )ow 13's which is where I want to be. As I said in other threads, im not trying to be the fastest guy around, but I dont wanna be embarrassed to accept a challenge on the street either.

 

[modo]

with E7's you'll never crack 270whp

i've seen e7s and factory intaked 302s make over 300 BUT these were on cars that had extensive amount of porting / milled and were only done to make money in grudge races. it would not be worth the money to do it unless you had a specific purpose

 

[Metrock]

Check My Sig.

 

[sn95gtvert]

94 cobra, stock long block
bbk equal length shorties, BBK X-Pipe (O/R), Mac Pro Dumps
Underdrive pulleys, 70mm TB, CAI
Short-belted (no A/C or Smog)

those are some nice numbers!
man now i wish i would have put my gt40 heads on when i had them.

253rwhp/294wtq pre-tune, 15:1 at wot.... not good
276rwhp/310+(dont remember exact) after tuning

 

[Paul]

Enough to run 13.99 @ 98 mph in a full-weight daily driver '95 GT.

 

[97 king cobra]

248rwhp 288rwtq.... 95 gt cai, gt40 intake, stock e7 heads, 75mm tb, short belt, long tubes, o/r x pipe, dynomax racebullet muflers.

Went 12.9 @ 104.5mph @ 2900lbs w/ driver.

 

[Passenger]

previous owner said my '95 dynoed 226/300. Always thought the tq sounds high, but never really worried about it

 

[Mntlkase]

Enough to run 13.99 @ 98 mph in a full-weight daily driver '95 GT.

must not have all that much power then. My STOCK 95 GT went 13.885 at 101 with just gears and a clutch. I have the timeslips for proof as well.my best friend raced me on the best run, and ran a 14.0 with a BONE STOCK 03 GT

 

[Pure84GTT]

with E7's you'll never crack 270whp

i've seen e7s and factory intaked 302s make over 300 BUT these were on cars that had extensive amount of porting / milled and were only done to make money in grudge races. it would not be worth the money to do it unless you had a specific purpose

extensive porting would not be a stock long block.

 

[modo]

with E7's you'll never crack 270whp

i've seen e7s and factory intaked 302s make over 300 BUT these were on cars that had extensive amount of porting / milled and were only done to make money in grudge races. it would not be worth the money to do it unless you had a specific purpose

sure it is... stock untouched is a different story.


extensive porting would not be a stock long block.

 

[longlive289s]

327rwhp/313rwtq. sig has all the info. know that im about at the limit and trying to figure out where to go next with this car

 

[OnyxCobra]

he said stock long block :thumbsup:

 

[forcefedhatch]

well... n/a im out of this one

 

[Venom351R]

awwwww.....I cant play

 

[Mntlkase]

Hey now, theres nothing wrong with porting your stock shit. Im just trying to get a idea to see where I may be able to get without swapping heads\internals\etc.... After yall's responses im assuming 300-340 is pretty much the thresh-hold which would work for me.

 

[Venom351R]

a stock 302 with bolt ons you wont see much over 300. Your looking anywhere from 270-305 most of the time. 340 is pushing it

 

[mikey94gt]

Mine made 294 hp and 334 tq with a spun rod bearing (found that 3 months later).

with a fresh longblock 5 years ago the car made 304hp and 344tq. the new engine better make alot more than that.... ha