Horus Works
New Member
- Joined
- Jul 31, 2021
- Messages
- 17
- Reaction score
- 10
Hey all, here is a walkthrough video I made for changing the ball joints, and tie rod ends, while I did this job on my car.
Here are the torque specs:
Ball joint stud nut - 148-202 Nm (109-149 lb-ft)
Tie rod end nut - 47-64 Nm (35-47 lb-ft)
Front stabilizer bar link to the front suspension lower arm - 16-22 Nm (11-16 lb-ft)
Brake caliper retaining bolts - 100-130 Nm (74-95 lb-ft)
Lug nuts - 115-142 Nm (85-104 lb-ft)
Hope it helps somebody out
Here are the torque specs:
Ball joint stud nut - 148-202 Nm (109-149 lb-ft)
Tie rod end nut - 47-64 Nm (35-47 lb-ft)
Front stabilizer bar link to the front suspension lower arm - 16-22 Nm (11-16 lb-ft)
Brake caliper retaining bolts - 100-130 Nm (74-95 lb-ft)
Lug nuts - 115-142 Nm (85-104 lb-ft)
Hope it helps somebody out
Last edited: