Fast stang16
New Member
- Joined
- Jun 17, 2013
- Messages
- 49
- Reaction score
- 0
I was finally able to get down to the dyno tuner. My lean problem was due to timing being set to 41 degrees. I adjusted it down to 10 degrees and changed a few things on the chip and it's putting down 280 hp at the read wheel 315 ft/lbs. Based on my set up, are these good numbers?
1994 5.0 forged internals, 12:1 Pistons, x303 cam, edelbrock upper and lower intake, trickflow heads, 70mm throttle body, 1.6 rockers, msd ignition, 24lb injectors, underdrive pulleys, bassani exhaust, 4.10 gears, 5 speed
1994 5.0 forged internals, 12:1 Pistons, x303 cam, edelbrock upper and lower intake, trickflow heads, 70mm throttle body, 1.6 rockers, msd ignition, 24lb injectors, underdrive pulleys, bassani exhaust, 4.10 gears, 5 speed