dyno results

[purple96]

i got to run my car on the dyno yesterday, heres a little background. 1996 mustang coupe. 2 options, 5 speed swap, shaved heads, and a k&n drop in, 138,xxx miles.

126hp and 184 ft.lbs hit 121mph on the dyno at the top of 4th

so figure in the 18% lost in the drivetrain and that puts me at the stock flywheel numbers for a new single port 3.8L (150hp 215ft.lbs)
good? bad?

 

[v6mustang94]

Here are the dyno runs on my '94. It's an automatic and had 13x,xxx on it when I was on the dyno

Mods: CAI, Dual Exhaust, Intake Spacer, 25% UDP, X-Cal2

Run 1:
121.81hp and 186.14tq

Run 2:
129.37hp and 196.42tq

 

[purple96]

looks like i didnt do too bad then

 

[sean_land]

my dyno results with:

k&n drop in filter, no silencer.
3.73's and a posi (not ffrp tloc)
full 2.25" exhuast, no crossover, magnaflow high flow cats (2) and flowmaster original 40's
18x10's out back (these are way too big makes my car way slower) im switching to 17x8's with 275/40/17's all around.
no tune. i was at the shop to get a speedo recalibration gear for the 3.73's and i dynoed it without the gear in the first to pulls in fourth gear hit the limiter and the third pull was done in third gear.

137.35rwhp and 195.60rwtrq

 

[sean_land]

here is the dyno sheet:

[attachment deleted by admin]