dyno time

[gtfla2]

Okay today I put my Bone stock 98 GT on the dyno at school (UTI) ON my first and best run I Put out 181.06HP and 258TQ I ran it 4 time and my HP stayed at 181 and as my car heated up the TQ kelp going down that do you guys think my first mod should be?

 

[justinschmidt1]

full pi swap, supercharger

Gears are always a good mod...but you really need to ditch the NPI parts...

I would say pi intake at the least, pi intake and pi cams are good.

Full pi swap is the best but will cost a lot more than just intake/cams.

 

[red281gt]

NAWZZZZZ :hammer:

 

[LI98GT]

full pi swap, supercharger

Gears are always a good mod...but you really need to ditch the NPI parts...

I would say pi intake at the least, pi intake and pi cams are good.

Full pi swap is the best but will cost a lot more than just intake/cams.

Justin's got the right recipe to go with first. Once you have some engine mods under your belt, I would recommend ditching the mid pipe for high flow catted x or H for improved exhaust flow and a loss in weight.

 

[justinschmidt1]

full pi swap, supercharger

Gears are always a good mod...but you really need to ditch the NPI parts...

I would say pi intake at the least, pi intake and pi cams are good.

Full pi swap is the best but will cost a lot more than just intake/cams.

Justin's got the right recipe to go with first. Once you have some engine mods under your belt, I would recommend ditching the mid pipe for high flow catted x or H for improved exhaust flow and a loss in weight.

+1...o/r mid pipe is a great mod for these cars

 

[AaRoN]

PI swap

Midpipe

 

[gtfla2]

Well I don't want to ditch to much money in this car I giving it to my little cousin when he turn 16 in june I just want it to make over 200hp before I give it to him I buying a used non z06 c6 vette when i get rid of this so I kind of need to save my money up I was thinking of doing long-tube headers with a x-pipe.

 

[justinschmidt1]

long tubes with an o/r x pipe should put you solidly over 200 whp

 

[Jrgunn5150]

A pi intake and Offroad midpipe will do that. Why bother? 200 rwhp isn't any less lame than 180... You can just say it has 200 rwhp for free, who will know the difference? :hammer: