Educate me on front bumper cover removal

[Michael Soldan]

I am in the process of putting fog lights on this car and I need to get under to bolt the brackets in place. I don't see any way of doing this without getting the bumper cover out of the way. I may be wrong, but removing the cover will access everything I need to get at.

 

[Mustanger]

In my 94 I can reach up & completely remove the GT fog lights with the brackets & not touch the bumper...Use good jackstands...

 

[Michael Soldan]

OK , thanks Mustanger, I only had a quick look from underneath so if it can be done without pulling the bumper cover thats what I'll do. I think pulling the bumper cover looks like a lot of work unnecessarily. Thanks for you reponse

 

[g36 monkey]

Really the bumper comes off pretty easily.

Two nuts in either fender (these are the hardest part) that hold the edges of the bumper to the fender.

One screw in either fender liner.

A few Christmas tree pop in pieces. There may be a screw or two elsewhere, but really, they come off pretty easily.

 

[Tally_4.6]

Shut up new edge guy ^

The hardest part about getting a bumper off an sn95 is popping the 3 tabs underneath the headlights on the header panel for each side.

If you get mad or impatient, like i have...you'll crack it.

 

[ElrodKTPQ_89]

Shut up new edge guy ^

Don't tell him to shut up drop top guy

The hardest part about getting a bumper off an sn95 is popping the 3 tabs underneath the headlights on the header panel for each side.

If you get mad or impatient, like i have...you'll crack it.

Gosh effing dang it I know that's right...short tempered as fvck and trying to get them out without breaking just don't mix.

 

[g36 monkey]

You know, I totally forgot about that I haven't done it in so long. Step one, buy a new edge. Step two, enjoy easy bumper removal.

And lmao Thanks for having my back Elrod

 

[SnakeBit!]

have done both (new edge and sn95) and both are the same to take off. bunch of push pins and 4 (2 on each side) 11mm nuts and its off.