Stevelknievel
New Member
- Joined
- May 1, 2018
- Messages
- 4
- Reaction score
- 0
Hello all, first off I apologize for what are possibly stupid questions that have been answered already but my searches haven’t produced the info I’m looking for.
I’ll start with the car, it’s a 97 originally a v6 car and I’m in the slow process of a 351w/c6 swap.
Obviously the k member in the car will not work but I was given a v8 k member from a fox, my question is will all the sn95 control arms and such fit this k member and still be able to be aligned? My 2nd question is regarding the fuel system, I will be using a carb on my engine but I’m also considering converting to e85 while I’m reworking it anyways. I assume all of the lines will need to be replaced, but what about the tank, and the sending unit?I planned to just install an upgraded pump with a regulator near the carb.
I’ll start with the car, it’s a 97 originally a v6 car and I’m in the slow process of a 351w/c6 swap.
Obviously the k member in the car will not work but I was given a v8 k member from a fox, my question is will all the sn95 control arms and such fit this k member and still be able to be aligned? My 2nd question is regarding the fuel system, I will be using a carb on my engine but I’m also considering converting to e85 while I’m reworking it anyways. I assume all of the lines will need to be replaced, but what about the tank, and the sending unit?I planned to just install an upgraded pump with a regulator near the carb.