Just replaced mine. The old one is actually in decent condition, I’m just kinda OCD about plastic parts! So, it’s off my ‘95 Cobra but may fit 6 cylinder, GT, et al. So if you want it it’s free, just pay shipping. Not looking to make anything on it. Just hate to see it go to waste.
Reply back here or send me a private message.
First pic is the underside: nozzles in place(25 yrs old!); screen missing because I had to reuse it on the new one.
Second pic is the top side: somewhat faded bit no obvious scratches and all 6 clips in place.
you will need the 3 plastic screws/ anchors, but they’re pretty inexpensive.
Reply back here or send me a private message.
First pic is the underside: nozzles in place(25 yrs old!); screen missing because I had to reuse it on the new one.
Second pic is the top side: somewhat faded bit no obvious scratches and all 6 clips in place.
you will need the 3 plastic screws/ anchors, but they’re pretty inexpensive.
Last edited: