headlight tips

[Orange Stang]

hi all, im in the process of replacing the lights on my GT, and have run into some problems.

I have the corners out, but I cant get the tabs to go in all the way on the last two bolts on each side to slide the headlights out.

Any tips?

 

[DropTopPony]

did you take off the little washers/clips? After they are off just squeeze the black part and slide out.

 

[Orange Stang]

yea, the clips came off, I just cant get the black parts tabs to squeeze off, hmmm

 

[Marvin97]

get a small boxed end wrench to slide over them to compress the tabs, I can't remember what size I used though.. works for me

 

[Orange Stang]

thanks guys, i got them in, but now I have to redo the drivers side because it needs aimed........... I hope I can get them out easier................

 

[2slo95fiveoh]

They don't have adjusting bolts sticking up? I can't remember how they are setup.... I think on the SN95 you can just take a screwdriver to
the back of the adjusters and do it that way...

 

[Orange Stang]

not sure,

All I know is the passenger i measured up to the stock ones bolts, and it fit perfect, and the driver side I forgot to do that, and its not in right, and is off by a few CM.

 

[OnyxCobra]

take the aimers off the old headlights and put them on the new ones.

 

[Orange Stang]

thats what I did today, there perfect now, check thread in members rides! ccasion14:

 

[greenscobie86]

take the aimers off the old headlights and put them on the new ones.

That's what I did too! Worked like a charm.