Hiding a few wire harnesses in engine bay.

WUTUGOT · Mar 30, 2008

I'm trying to hide a few wire harnesses and looms in the engine bay on my 94 GT. I was wondering if I can mount the ABS computer looking thing on the passenger side, upside down in the fenderwell or does it have to be mounted the same way it is in the engine bay?

ryclef331 · Mar 30, 2008

are you talking about the ABS block with the lines running into it?

ScottyDsntKnow · Mar 30, 2008

If you really want to be able to hide the wiring harnesses you need to pull the fenders and then just get creative...

WUTUGOT · Mar 30, 2008

No, not that aluminum block with the lines connected to it. Above that on the frame rail there is a box, computer looking thing that has a large connecter that bolts into it with an 8mm bolt. That is what I'm trying to describe. Maybe it doesn't have anything to do with the ABS, it's just right above it. I just don't know if I can mount it upside down from how it was mounted stock. I would assume that it could, but wanted to see if anyone thought otherwise.

ScottyDsntKnow · Mar 31, 2008

The CCRM??? That's the only thing I can think of. That's the thing mounted right behind the overflow tank and it attaches with a single 8mm bolt.

It can go anywhere really, just as the harness reaches.

WUTUGOT · Mar 31, 2008

I believe that is it. Thanks for the clarification. I have it mounted upside down in the inner fender now. What is the CCRM and what does it do?

ryclef331 · Mar 31, 2008

WUTUGOT said:
I believe that is it. Thanks for the clarification. I have it mounted upside down in the inner fender now. What is the CCRM and what does it do?

That is the CCRM. Its a relay module for the fans, fuel pumps, ecu,....pretty much everything.