Is This Safe?

[sn95 bullitt]

Is this safe to drive on?

 

[MustangChris]

get a penny.

stick it in the crack.

show us how deep it is.


from this angle, yes. but I'm just some dude behind a computer looking at a picture from 2,000 miles away... .. . lol.

 

[sn95 bullitt]

get a penny.

stick it in the crack.

show us how deep it is.


from this angle, yes. but I'm just some dude behind a computer looking at a picture from 2,000 miles away... .. . lol.

Lol tires are new. I'm talking about the slice in the wall.

 

[KillNThrill24]

He's saying stick the penny in the slice lol to make sure the slice isn't terribly deep

 

[MustangChris]

^this dude is on it.




someone give him a raise

 

[sn95 bullitt]

 

[chris91]

Whoever mounted your tires put them on wrong. Those numbers that look like a stamp should be on the inside.

As long as that slash isn't deep you should be okay. Now if that was a crack from dry rot you would need to get new ones ASAP.

EDIT- Just saw the penny pic. That's fairly deep. I'd keep your eye on it. You SHOULD be okay though.

 

[sn95 bullitt]

Whoever mounted your tires put them on wrong. Those numbers that look like a stamp should be on the inside.

As long as that slash isn't deep you should be okay. Now if that was a crack from dry rot you would need to get new ones ASAP.

EDIT- Just saw the penny pic. That's fairly deep. I'd keep your eye on it. You SHOULD be okay though.

OK. I took the hammer and bent the medal in the fender up. I'm getting the fenders rolled tommrow. I hope to get some 315's soon.

 

[sn95 bullitt]

Just ordered my 315's.

 

[chris91]

Make sure whoever is rolling them has done it before. I've seen too many people that think they know what they are doing totally f**k up their quarter panels. From quarters that wave to ya to cracked paint that will eventually flake off. Make sure they heat up the paint so it wont crack.

 

[chris91]

Just ordered my 315's.

You have some 10.5's to put em on?

 

[sn95 bullitt]

You have some 10.5's to put em on?

Not yet. Next to order.

 

[sn95 bullitt]

You have some 10.5's to put em on?

Rims ordered. Worst $700 I have ever spent.

 

[fleau-fox]

Not so bad, only "extra" plastic from the factory!

 

[CC'S95GT]

I think the tires are ok because the cut is angled and not straighter into the side wall.

Another question, you have a tire rub and you don't have 315's? I hope your running spacers and that's the reason for the rub.

Every once in a while my 315's will rub. I think if I just trim the finder lip up to the spot welds (about 3/4") it'll be fine.

 

[ProKiller]

looks fine to me. as long as you don't see cords it should be fine. but seems like it's a moot point anyway if you ordered new wheels/tires

 

[sn95 bullitt]

1 1/4 spacer.

LMR just called me and told me they only had one wheel. Had to cancel the order.

 

[Pete@FTR]

Holy shit 1.25 spacer? You'll like the 315s better anyways they look badass from the back, especially with just like a 3/8 spacer


Sent from Tapatalk for iPhone

 

[ttocs]

shouldn't need any spacers with 10.5 wheels.

 

[white95]

+1 [MENTION=11896]ttocs[/MENTION]

spacers + 10.5" wheels = Joe Dirt