Im thankin about the pi heads and intake with a set of comp 270 cams and new springs and im wonderin will i have any ptv issues and also is their a better flowin intake than a stock pi intake or would i be better to just use the stock intake. im also thakin about sprayin it witha 75 shot when i want a little extra power so plz any input would be greatly appreciated My car is a 96 gt with 104000 miles with an auto Im also putin abbk 78mm throttle body and a set of bbk shorty headers
Need a littl info on some heads and cam swap
- Thread starter rstdennis
- Start date
DropTopPony
Post Whore
The 270's are nice but you could run into some PTV issues if not installed properly.
Stock PI Intake is decent and shouldn't be a restriction on what you have planned.
Stock PI Intake is decent and shouldn't be a restriction on what you have planned.
i believe that mid 01-04 heads have the removable cam gears i'd try to find these heads and make sure you get them because AFM makes a tool that allows you to change out cams without taking off the timing cover but you have to have the removable cam gears
