need motor mount info

[sykostanger]

hey guys, im sure this is the wrong place for this question,
but im trying to figure out how to mount a 351 in my 89 notch
without having to use a 4" hood. i know this is a sn95 site,
but i also have a fox notch, and i cant find a good fox site, so
if anyone can give me a little info or point me at a fox site thats
anywhere near as informative as this one id greatly appreciate it.

 

[QTRHRSE]

have you tried corral.net

 

[sykostanger]

nope, but i'll check that out, thanks for the reply

 

[Magic]

hey guys, im sure this is the wrong place for this question,
but im trying to figure out how to mount a 351 in my 89 notch
without having to use a 4" hood. i know this is a sn95 site,
but i also have a fox notch, and i cant find a good fox site, so
if anyone can give me a little info or point me at a fox site thats
anywhere near as informative as this one id greatly appreciate it.

What intake manifold are you using?

Best way to start is to use the motor mounts from a Convertible GT foxbody....at your parts store, just specify for an 1988 Mustang GT convertible with AC.....

If you want lower, I know HPM Motorsports makes a motor mount kit, these are solid motor mounts and lower the motor even more than the convertible motor mounts.......Part Number HPM-6000-BZ
Here is the Link:
http://hpmperformanceproducts.com/page.php?7

 

[sykostanger]

Thanks for the info man, and I plan on using the Edelbrock air gap RPM
or some such, im open to suggestion. ive never done this swap before,
so any opinion is welcome. Thanks for the link.