Need some help (ASAP)

[MeanGrn Gt]

Hey guys i have really been wanting to go turbo badly and been watching for kits coming up cheap etc and i know to stay away from the ebay kits like ssautochrome and all them but i just found this.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33742&viewitem=&item=260206432387&_trksid=p3907.m29

It is just a guy trying to make some extra money so i am a little more confident in the quality compared to the others there. I asked of the modfications needed to fit it on a 94/95 and he said that he would do it i just needed to let him know if/when i win the bid and he would do it.

My main question is on the turbo sizing. 60 trim w/ 1.00 hotside. This will be for my street car. i am not going to go crazy (for a few years atleast) and just want a mild streetable dd (350-400 would be nice). So i am just curious if the turbo would be sized properly. From what i have gathered the 60 trim is pretty good for a fairly stock 5.0 but i think the 1.00 hotside might be a little bigger and i will have more lag but higher max hp (not exactly what i want for a street car). im planning on 10-12 psi

I just realized he is not taking paypal so i will pry not bid on it unless he gets back to me before its up and confirms he will. I have been watching for supercharger kits and turbo kits for awhile and so far no luck. maybe ill just spray it. but anyways just let me know what ya think

 

[jfor441]

I am not too up to speed on Turbo's, but you might want to check out turbomustang.com or whatever the name was changed to.

 

[LAFENATU]

Turbos are real finicky dude. One day the car will run perfect, next day it will run like shit.

Unless you have the cash to play with...stick with a blower.

If you are 100% on turbo....I would do a single 66mm Turbo with a .96 housing. If you want the boost a little sooner, do a .81 housing