New Guy From RI!!!!

Paul94gt

New Member
Joined
Aug 25, 2013
Messages
35
Reaction score
0
What's up guys. I've been out of the Mustang loop for about five years now. But I am back with a tight little whip. Over the course of the last few weeks I have been looking at one rotten Fox body after another. After a a few weeks of frustration, I started looking into the SN95 Cars. I love Fox bodies, built and broken a few, but it became apparent I wasn't going to find a nice one up here in New England. So the switch to a SN95 car seemed logical. The second one I looked at turned out to be a peach. The car is pin straight and for 20 years old(1994), almost perfect. Aside from 3.73 gears and a a Blowmaster Cat Back kit, it's a 100% bone stock.

The molestation will begin slowly and methodically this week. Mild bolt-ons and chassis stiffening are the first order of business. Full length subs, strut and K brace are in my Maximum Motorsports cart already. Along with CC Plates and a Bumpsteer kit. The car has either C or B motorsport springs in it. Along with stock replacement struts and shocks. I already have rear control arms and torque box reinforcements. Thees suspension mods along withe PBR calipers and MM braided stainless brakelines(I already have this stuff) will pretty much finish the suspension for a while.

Dirvetrain mods are being hotly debated in my head. So that's a little ways off.

Anyway, if you've made it this far, you probably want to see a pic.....

Can't wait to put my '03 Cobra wheels on it!!!!


232323232%7Ffp543%3A4%3Enu%3D84%3A7%3E438%3E259%3EWSNRCG%3D36896%3B7%3B5%3B34%3Anu0mrj
 

Ferocious

Post Whore
Joined
Jun 1, 2011
Messages
12,257
Reaction score
611
Location
San Diego
Welcome to the site.

You don't mess around huh. That's a nice list of goodies you have planned for it.
 
OP
OP
P

Paul94gt

New Member
Joined
Aug 25, 2013
Messages
35
Reaction score
0
Nice looking car from the rust belt area! Welcome and have fun with the build.

You're telling me. Pretty much all I've seen for the last month is rusty junk. When I popped the hood and looked at the strut towers and then under the car, it was like the clouds parted and the sun came shining through. Angels sang and the birds started chirping.....

Street view.

232323232%7Ffp54369%3Enu%3D84%3A7%3E438%3E259%3EWSNRCG%3D368978543334%3Anu0mrj


232323232%7Ffp54364%3Enu%3D84%3A7%3E438%3E259%3EWSNRCG%3D368978543634%3Anu0mrj
 

Nightmare

Well-Known Member
Joined
Aug 21, 2012
Messages
1,171
Reaction score
65
Location
Cedarburg Wi
Welcome to the site. Car looks really good, and you bought it at the right time. SN's are at the same point Fox Bodys were at about 5 years, where you could get a good one for about 4-6k. I am sure that will change next year when the 94's hit that 20 year mark.
 

kb1982

Active Member
Joined
Aug 10, 2013
Messages
591
Reaction score
5
Location
Kentucky
Welcome to the forums. Looks like you found a nice clean ride to polish and mold into your liking's.
 
OP
OP
P

Paul94gt

New Member
Joined
Aug 25, 2013
Messages
35
Reaction score
0
Welcome to the site. Car looks really good, and you bought it at the right time. SN's are at the same point Fox Bodys were at about 5 years, where you could get a good one for about 4-6k. I am sure that will change next year when the 94's hit that 20 year mark.

$2900:headbang::smiley:

I am the third owner. First was a little teacher lady. The second, was a Grampa dude. He and his son, 96248a here, are both Mustang guys. So it was a great transaction all around. I got a sweet peice. They knew it's going to a great home. Overall plans are a warmed over, very street friendly drivetrain. I have another bottom end and a whole Tremec Five Speed setup for the car. I just need pedals and a 5 speed ECU. Short of a fresh coat of paint, the car should be done by Spring

Then a turbo kit and 3.27 gears will happen in a few years.

I won't allow myself to get sidetracked or distracted with this one. It's too nice and soooooo tight. I can't believe I have a Mustang that doesn't rattle:nono:
 

Nightmare

Well-Known Member
Joined
Aug 21, 2012
Messages
1,171
Reaction score
65
Location
Cedarburg Wi
$2900:headbang::smiley:

I am the third owner. First was a little teacher lady. The second, was a Grampa dude. He and his son, 96248a here, are both Mustang guys. So it was a great transaction all around. I got a sweet peice. They knew it's going to a great home. Overall plans are a warmed over, very street friendly drivetrain. I have another bottom end and a whole Tremec Five Speed setup for the car. I just need pedals and a 5 speed ECU. Short of a fresh coat of paint, the car should be done by Spring

Then a turbo kit and 3.27 gears will happen in a few years.

I won't allow myself to get sidetracked or distracted with this one. It's too nice and soooooo tight. I can't believe I have a Mustang that doesn't rattle:nono:


Well that car could already have the 3.27 gears.
 

Addermk2

Well-Known Member
Joined
Mar 7, 2006
Messages
2,534
Reaction score
56
Do yourself a huge favor... Don't buy ANY performance parts without talking to me first.

Ask around... In being serious. I live in Coventry, right off Rt. 117.
 

Latest posts

Forum statistics

Threads
78,534
Messages
1,535,729
Members
16,186
Latest member
Armand

Members online

No members online now.
Top