What's up guys. I've been out of the Mustang loop for about five years now. But I am back with a tight little whip. Over the course of the last few weeks I have been looking at one rotten Fox body after another. After a a few weeks of frustration, I started looking into the SN95 Cars. I love Fox bodies, built and broken a few, but it became apparent I wasn't going to find a nice one up here in New England. So the switch to a SN95 car seemed logical. The second one I looked at turned out to be a peach. The car is pin straight and for 20 years old(1994), almost perfect. Aside from 3.73 gears and a a Blowmaster Cat Back kit, it's a 100% bone stock.
The molestation will begin slowly and methodically this week. Mild bolt-ons and chassis stiffening are the first order of business. Full length subs, strut and K brace are in my Maximum Motorsports cart already. Along with CC Plates and a Bumpsteer kit. The car has either C or B motorsport springs in it. Along with stock replacement struts and shocks. I already have rear control arms and torque box reinforcements. Thees suspension mods along withe PBR calipers and MM braided stainless brakelines(I already have this stuff) will pretty much finish the suspension for a while.
Dirvetrain mods are being hotly debated in my head. So that's a little ways off.
Anyway, if you've made it this far, you probably want to see a pic.....
Can't wait to put my '03 Cobra wheels on it!!!!
The molestation will begin slowly and methodically this week. Mild bolt-ons and chassis stiffening are the first order of business. Full length subs, strut and K brace are in my Maximum Motorsports cart already. Along with CC Plates and a Bumpsteer kit. The car has either C or B motorsport springs in it. Along with stock replacement struts and shocks. I already have rear control arms and torque box reinforcements. Thees suspension mods along withe PBR calipers and MM braided stainless brakelines(I already have this stuff) will pretty much finish the suspension for a while.
Dirvetrain mods are being hotly debated in my head. So that's a little ways off.
Anyway, if you've made it this far, you probably want to see a pic.....
Can't wait to put my '03 Cobra wheels on it!!!!