PI Cams (quick question)

[reivaxtorres]

blah blah blah...this sucks won't have good roads until prolly late march

yeah, that really does suck. us, on the other hand, well...........lets just say i dont have to swap out my summer tires :santa_evil: (again)

 

[Casper98gt]

plus one on the romeo cams. Buy the new bolts and you can reuse youre old shims. If and when you use the wedge tool from ford make sure you push down and make sure the tensioner relives all the pressure before you start of you will have a slight problem getting the cam off the gear.

I have all the tools because im a ford tech and i bought my own i belive it was shy of 70 dollars. But i did find a site where you could buy it online. I posted it up but it was never made a sticky. Should have been. I will do a search for it on here and post what i find.

 

[ck5.0]

I used the Anderson Tool worked fine for me. Its for sale if you need it.

 

[Casper98gt]

http://www.amazon.com/Timing-Chain-...C1CZEC7XUS&s=automotive&qid=1183747848&sr=1-5

Thats it from amazon, and its 93 bucks.

 

[Black97GT]

alright thanks a lot for the info! Can't wait to start this project.