power steering pressure hose?

[jaystang1331]

I was looking for a write up on this just wanted to know how difficult it is to change? Anythong would.help

 

[CoD_50callongshotz]

dont know of any write up but it isnt really that hard. just un screw the threaded fitting at the pump and then at the rack. It is a little difficult to get to the fitting on the power steering rack so ive found if you unbolt the rack from the car and let it hang, its much easier to get to. good luck

 

[jaystang1331]

Thanks i've been searching and some say you can do it with an open wrench it will prob take a while lol but im trying this weekend keep you posted

 

[Paul]

I recommend using a line wrench instead of a traditional open-end wrench. They aren't too difficult to strip out with a normal wrench.

Paul.

 

[jaystang1331]

thanks il try that too . Do you guys think i should pick one up at autozone or order online

 

[Paul]

Whatever's cheaper or more convenient.