Selling my 97 cobra, anyone looking to buy one?

[jys97cobra]

Modifications: Vortech V-1 Blower, Shorty headers, Offroad H-Pipe, Mac exhaust, MSD coils and wires, NGK split fire plugs changed at 40,000. Pro-M 83mm MAF, Short Throw shifter, Bullitt pedals, Aluminum Radiator, Strut Brace, Aluminum Driveshaft, Subframe connectors, Steeda steel rear lower control arms, FRPP upper control arms rear, Transmission urethane mount, Tokico shocks front and rear, Spec stage 1 clutch and pressure plate, Spec aluminum flywheel. Clutch and flywheel done at 56000 miles. Aluminum quadrant, adjustable cable, and firewall adjuster also installed. Brembo front rotors and pads w/ painted front calipers. Bullitt Wheels 17x9 Front and 17x10.5 Rear. Tires have about 75% life rear and 50% front. Recaro seats, SLP boost gauge on A-pillar. 8.8 Eaton HD Posi Unit w/ 31-spline 8.8 Axles, 3.55 gears. Car was Dynoed and makes 407.1 RWHP and 342.3 Torque.


Reaching 58000 miles and am asking $11,000. Am from Brooklyn, NY. Email me at [email protected] or call 6462839688, Jerry.

 

[NERD]

Why's the Hp so low?

 

[justinschmidt1]

Why's the Hp so low?

Why would it be any higher? He is making what it should make with 8 psi.

8 psi will be about a 50% gain....so take 300, add hlf of that and you get 450 fly wheel hp

407 to the wheels is right on with 8 psi.

 

[98COBRA_MIKE]

kinda low on torque....but GL on sale