MeanGrn Gt
Well-Known Member
- Joined
- May 29, 2006
- Messages
- 3,094
- Reaction score
- 1
Havent been around here much at all in a very long time but decided i need to start participating again. Havent been on in forever but some of the older members will remember from years past. I picked up an 83 t top for a project last fall and it is now time to get going on it. So far have put in a ram hdx clutch, swapped to a 10.5 clutch flywheel, got to install my clutch quadrant/adjuster and have battle boxes on the way to stiffen/brace up the old fox.
The plan for the car is to be a strip/cruiser car. My plan is to build a car myself and do everything to it myself (from body to motor to chassis) so i can build it my way and try to have something a lil different than most others (hence why i decided on a t top). Have most of the parts needed to throw nitrous on it so going to run the motor thats in it with 75-125 shot till it breaks lol. Next weekend hope to pick up another 83 donor car to swap all the parts i need for the interior and other odds and ends. going to undercoat/rust proof the floor and put in some sound deadener i have already. Car is solid and was primered by the previous owner (not the best job but the metal is still solid underneath). Here are some pics from when i brought it home. There will be updates in a few weeks as i plan to have it at the track for opening street legal in a lil over a month.
The plan for the car is to be a strip/cruiser car. My plan is to build a car myself and do everything to it myself (from body to motor to chassis) so i can build it my way and try to have something a lil different than most others (hence why i decided on a t top). Have most of the parts needed to throw nitrous on it so going to run the motor thats in it with 75-125 shot till it breaks lol. Next weekend hope to pick up another 83 donor car to swap all the parts i need for the interior and other odds and ends. going to undercoat/rust proof the floor and put in some sound deadener i have already. Car is solid and was primered by the previous owner (not the best job but the metal is still solid underneath). Here are some pics from when i brought it home. There will be updates in a few weeks as i plan to have it at the track for opening street legal in a lil over a month.