Trying to get the look?

[yell95ow]

Hey guys i have a 95 gt and I want to give it that low wide look and need some help. What kind if springs to use and what size wheel spacers to push the back wheels out flush with the fenderwell. I have 18x9 fr500 wheel in front and 18x10 in rear with a 285/35/18 tire. Any pics or advice would very appreciated. Thanks

 

[ivan12]

A 295-315 rear tire and a eibach pro kit should get you there. A spacer might make the wheel flush but when you look at it from the back it's not going to look right.

 

[Passenger]

Buy you some 335's like JonBeast on here had and some Eibach's. Defiantly have the look then

 

[Untame-d]

That's about all it would take.. 335's fit? Those are pretty damn big!

I have to go find Jonbeast's car now to take a look.

 

[Twista]

http://sn95forums.com/index.php/topic,59680.msg982629.html#msg982629

 

[cantbuytime]

I have 295's now. I am going to take them off, have the wheels widened an inch and go with 305's to 335's.

IMO- ANything over 295 wide in the rear is overkill if you dont have the power to back it up.

 

[Steven]

pro kit= no go. Sportlines or H&R Super sports. Otherwise it'll be jacked up to high.

 

[blkmcnasty]

+1 H&R SS no isos = super low

 

[94Pro-5.0]

pro kit= no go. Sportlines or H&R Super sports. Otherwise it'll be jacked up to high.

+1 i did not like my pro-kit.

 

[yell95ow]

thanks to everyone that replied Im probably going with H&R SS spring. Possibly going with 305 tire in the rear.

 

[cantbuytime]

Sold my H&R springs, and now have cut Eibachs and the rear still sits high. Wish I had the H&R's back now.

 

[94Pro-5.0]

or you could just go coil-overs...

 

[duh09]

or bag it... RideTech makes a kit for our cars... wouldn't mind seeing a SN95 "stanced" out just to see how it could pull it off.