Updated track times...4.6 2V NPI bidding for 13s

[LI98GT]

Took the ride today with local mustang group to Atco raceway in Jersey- 4 hours each way. Came away with a best time of 13.72@100mph, backed up by a few 13.8s and 13.9s. Mods since the previous run of 14.32 were welded in Bassani mufflers into FRPP catback, Nitto DRs, 70mm TB and Trick flow plenum. I think the extra breathing from the updates helped the PI cams and PI intake work at their best.
I was very happy with the results as I'm still learning, and haven't had the car tuned as of yet. There were a few oddballs in the group of stangs running at the track, one being a WRX hatch. We actually paired up at one point. He ran a 15.08 to my 13.87.
A pic or two with some (sorrry) not very good quality vid coming as it was shot with a dig camera.

Scanned and added the timesheet.

 

[LI98GT]

Got a pic and a couple of runs. Sorry for the quality of the vids, but hopefully you get the idea.

Vs. the WRX


One of the 13.8 runs

 

[sanchezcruz_20]

NIIIIIIIIICE time dude!!!!!!!! Excellent 60' too! You have skills behind the wheel.

Sharp looking Mustang as well.

 

[Jrgunn5150]

You were running very good, congratulation's!

 

[LI98GT]

Hey thanks for the props guys. Would love to get a tune over the winter, come back in the spring and improve on the times even more. I was the only SN95 running that day, so I was happy to see those times come back. There was one Fox in the low 14s and most of the rest were new edges or 05-07s that were running real strong in the low 13s N/A and the ones that were SC were well in the 12s on DRs. There was one 97 Crown Vic, running for the first time SC'd with a Vortec combined with PI intake and PI Cams and 2800 stall that ran 12.7s - a beast.

 

[sanchezcruz_20]

What size are your drag radials?

I'm looking to invest in some as well. Plus, I thought I might go ahead and buy some deep dish rims for the rear while I was at it. That way I can have some deep dish wheels for around town and some drag radials mounted and ready to go for the track.

 

[LI98GT]

The DRs I put on the stock rims (17x8s) are Nitto DRs in 275/40/17.

 

[Red96GT]

How come your sig says you've done a PI Swap?

 

[sanchezcruz_20]

I think he is just emphasizing that he still has the NPI heads, in other words, he doesn't have the COMPLETE PI swap.

At least I think. ???

 

[LI98GT]

I think he is just emphasizing that he still has the NPI heads, in other words, he doesn't have the COMPLETE PI swap.

At least I think. ???

Yes sanchezcruz_20, you got it right. The "NPI" in the title refers to having the NPI heads in the stang. I swapped out only the NPI cams and NPI intake with the PI ones, leaving the NPI heads alone.