Weld Draglite wheel fitment

[dsrtjeeper]

I'm looking for lighter wheels for my '94. I've read that 15x10 Weld Drag Lites require spacers and caliper grinding when using the stock rear brakes. Is this true? Are long wheel studs needed?

I'm looking for a 15x10 that weighs 15lbs or less that bolts right up with no mods.

Thanks.

 

[RAU03MACH]

are you planning on running 15 fronts
widest you can do is 15 x 3 1/4
and 15 x 10 should fit good brake calipers is smaller on the rear
as far as wheel studs you should be good no spacer

 

[dsrtjeeper]

17's up front. Are you running these wheels?

 

[RAU03MACH]

On my 05 gt I have 15 x 3 on the front
15 x 10 on the rear pro star almost the same

03 mach 1 same set up

 

[RAU03MACH]

I do have 17 x 3.5 pro star

 

[dsrtjeeper]

I believe the brakes are different on those cars so I'm not sure about caliper clearance on my car. Hopefully someone will pop in and verify.
Thanks.

 

[RAU03MACH]

Mine are close to them

 

[RAU03MACH]

Did you install cobra calipers
If not should be good fit

 

[dsrtjeeper]

Reread post #1.