hey guys I found a nice set of saleen staggered set of wheels on a local classifieds ad.. they were on a 2001 and have 295 in rear,, should I have any problems with these wheels not fitting right besides maybe needing the fenders rolled ? I m not sure if these could bolt right on to my car with no issues or not.. thank you all for any input and help.. take care
wheel and tire question ????
- Thread starter xs man 27
- Start date
CC'S95GT
Post Whore
Since they were already on an 01. I'd say they would fit without any issues.
But you didn't put up a link to an ad. or any specs like wheel/ tire size (other than width).
You also didn't say what your putting them on either.
But you didn't put up a link to an ad. or any specs like wheel/ tire size (other than width).
You also didn't say what your putting them on either.
im sorry I should have been a lil more clear they are going on a 95 gt... these are the specs I found on the link in the ad of the wheels.. thanks again
Wheel Size:18x9, 18x10
Wheel Offset: +24mm, 22mm
Bolt Pattern: 5X4.5" | 5X114.3mm
Front Tire Specs: 255/40/18
Rear Tire Specs: 295/35/18
Wheel Size:18x9, 18x10
Wheel Offset: +24mm, 22mm
Bolt Pattern: 5X4.5" | 5X114.3mm
Front Tire Specs: 255/40/18
Rear Tire Specs: 295/35/18
Win
Legend
You should be ok...depending on which tire you you might have to flip quads... Also which tailpipe your running also you might have to dent them in a little.
for instance I had a set of 17" 03/04 machined cobra reps with 315/35 nitto 555r on my 94. They have an offset of 27mm... I didn't have to flip the quads or dent the tailpipes....I was running 99-04 tailpipes which have a larger tailpipe then our stock 94-95.
On my 95 Vert I have 03/04 reps with a 315 nitto nt05. I not only had to flip my quad but also had to dent my tailpipe a good bit. I am running a set of 3" bassani tailpipes.
for instance I had a set of 17" 03/04 machined cobra reps with 315/35 nitto 555r on my 94. They have an offset of 27mm... I didn't have to flip the quads or dent the tailpipes....I was running 99-04 tailpipes which have a larger tailpipe then our stock 94-95.
On my 95 Vert I have 03/04 reps with a 315 nitto nt05. I not only had to flip my quad but also had to dent my tailpipe a good bit. I am running a set of 3" bassani tailpipes.
Ninety8stang
Well-Known Member
They will fit. I had a set of saleens with the exact same tires size and they were just fine. I've ran a 315 without rubbing and my fender wells aren't even rolled. Haha
