Cobra82
New Member
- Joined
- Feb 16, 2021
- Messages
- 41
- Reaction score
- 11
I used the stuff for trans witch my car is a 5 speed and used the fan wires and fuel pump and lights for that side. I had to figure out what the abs wires were and take them out the harness to.What wires did you end up needing out of the ccrm. The right corner and just the trans
Yeah I used a wiring diagram to trace down what I had to pull out the harness. There is a YouTube video of a guy that did the terminator x system on a 95 cobra and I tried to follow what he did because there is really nothing out there for our cars. I've not even finished mine yet. I'm going to be using the MSD Solid-State Relay to run my fans and fuel pumps it makes things easier. The dash won't work unless you run other sensors or have to go to like a holley digital dash.So you just had to weed out the trans harness from the main harness or you had to make some splices. Sorry for all the questions I’m installing terminator x in my 94 gt 5 speed with a vortech
I planed on using one of the outputs for a fan relay and I already have the pump wired to a relay
The digital dash on makes it much easier and makes using the system later easier.Yeah I used a wiring diagram to trace down what I had to pull out the harness. There is a YouTube video of a guy that did the terminator x system on a 95 cobra and I tried to follow what he did because there is really nothing out there for our cars. I've not even finished mine yet. I'm going to be using the MSD Solid-State Relay to run my fans and fuel pumps it makes things easier. The dash won't work unless you run other sensors or have to go to like a holley digital dash.