1995 351 conversion

[raceingrob]

has any one in here done a 351 conversion on a 95 cobra i am doing one very soon. i am trying to figure out what headers to use some people say the factort ones will work with a little pullling and outhers say use the fox body swap headers so has any one done this and know what headers to go with

 

[Paul]

http://www.sn95forums.com/forum/index.php?topic=1612.0

 

[Addermk2]

one of the best parts of doing a 351w swap into the SN is that you can use your stock Alt and PS brackets, since they bolt to the head, not the water pump, like foxes

 

[Venom351R]

I have a 351 swap done in mine but it was done before I got the car. It has a set of Roush Shorty headers on it, no clearance issues

 

[tommybunz]

macs on mine 3/4 " clearance ( enough for me)

 

[Schiffy]

Check out Holcomb motorsports... they have an entire section dedicated to swaps, and the 351 is in there... I've got one im' working on. it just recently was dissassembled to the bare block, i'll be using the brackets off my '95, long tubes, and it'll be a 408, with a 210cc head from powerhouse engines. Paul is a really knowledgeable guy, also you can Google it, and there are tons of posts in different forums that talk about the 351 into a '95 swap... I'm going carb'd, so thats different then what you're probably doing.

 

[ScottyDsntKnow]

Dear lord we've covered this a billion and one times. Search on here, search on the corral, you'll find all the info you'll ever need.