94 cobra H/C/I CHANGE

[coats04]

im building a motor for the cobra.rather than the h/ci change.

basically i want it to make power to 6k-6.5krpm

.30 shortblock
cam-unknown yet
big ported gt40's with 1.94/1.6's
stock cobra 1.7 rockers
intake unknown

im thinking about the trackheat intake but i need opinions on cams that work.
im trying to get this car down around 12.5 et on street tires.
will also be running 4:10's

i hear the stock cobra cam is junk
what cam do you prefer for a settup like this?

 

[Nacho]

Custom cam from www.camshaftinnovations.com

Regarding the heads, talk to www.thumperoforangepark.com

No need to get a 1.94 valve.

 

[coats04]

the heads are already done.i will check out the cam link though,thanks :happydrunks:

 

[Stangbangin]

werd on the custom cam..mine runs like a beast. its good seeing fellow lss guys in here too

 

[coats04]

werd lss! lol :happydrunks:

 

[LAFENATU]

Like above....if you can afford a custom cam...do it.


Ed Curtis @ Flowtech Induction (former NMRA champ) is awesome...

Jay Allen @ camshaft innovatons is excellent also

If the $300 for a custom is too steep...

The Crane Powermax 2031 (with 1.7's) was designed for those heads, the TFS Stage 1 (1.6's) cam is also very good.

:coolsmiley:

 

[coats04]

i plan on running the stock cobra 1.7's