95 v8 swap

[Jcw4793]

I have 2 95’s and one is a v6 shell, just missing the motor and trans, and a complete 95 v8. Im v8 swapping the v6 shell, which brings me to a question to be clear on. What all would be needed from the v8 shell to be transferred to the v6 shell?

 

[tvsn95]

whereas I have NOT done this particular conversion, it seems that you just pull all engine wiring with ECU and install into the V6 car.
That seems obvious BUT I would study the connector at the firewall and see what needs to be added for the internal wiring. you MAY need to add a wire or two or swap out the internal for the additional injectors.
I have done several Fox car swaps and they are VERY year specific in the wiring department.
My first guess is it will be simple.

 

[RAU03MACH]

Complete engine transmission
All electronics under hood harness ecu fan ect.

 

[Jcw4793]

I keep running into the saying that were all the same in 94-95, besides the engine wiring and such, but i keep finding differences in the two. Maybe because the v6 is base but the v8 is mach 460, with power doors locks and rke?

 

[apsmith49921]

The v6 car is only wired and ecu supported to fire 6 injectors and plugs not 8. That's why people say wiring and ecu