ABS delete

RichV · Mar 2, 2013

What are options of dumping the ABS box? I'm sure you can custom bend some lines and get rid of it to clean things up, but does anyone meake a kit?

If you replace lines from a non ABS car, do you have to replace everything from the PV to each corner?

I have the ABS disconnected from operation, but want to dump the weight.

Thanks!!

95opal · Mar 2, 2013

Rich, aside from bending new lines or replacing the existing with non abs lines. They make an abs delete manifold which is a plug and play kinda thing. Probably the easiest way to go. Being I went with a brakeline delete in my bay I just ran my own custom lines which wasnt bad at all.

RichV · Mar 2, 2013

I'll have to look for the manifold. That may be OK for now, just incase they allow us to put ABS back in. Re-program it for the track.

Do you know the manufacturer?

MustangChris · Mar 2, 2013

Well said Opal!

The manifolds are hard to track down.... :-/

http://www.modularfords.com/threads/136052-98-04-ABS-Delete-Manifold

Gold4.6 · Mar 4, 2013

My dad bought a billet piece that the lines hook up to replace the abs pump/module thing up in the front right of the engine well. Ill have to ask him where he ordered it but ill try and find a link to it. They're pretty pricey too, think he paid 150ish for his.

Gold4.6 · Mar 4, 2013

http://www.prbmachining-absdeletemanifolds.com/id80.html
Found something, it has roll control on it. Might have to dig around the site to see if he offers one w/o jt
edit- found it. http://www.prbmachining-absdeletemanifolds.com/id47.html

RichV · Mar 4, 2013

Thanks guys, I did find pbrmachining. Yea, a little pricey.

MustangChris · Mar 4, 2013

let me know what wiring changes need to be done, Rich. we just chopped the entire female receptor out of my wiring harness -- I'm thinking that may be why my speedo doesnt work. LOL.

RichV · Mar 4, 2013

I have my ABS currently disconnected, the plug at the ABS unit under the airbox, and the ABS computer is out. IIRC there was one under the dash. My speedo works just fine.

I have all the sensors out as well.