MustangChris said:i believe the cigarette lighter wiring will be the worst of it...
windsordeath said:I just got done doing this swap.. I used a 02' console in my 97' They pretty much bolt right in with the exception it seems that the console sits up higher in the rear than the stock one... Basically like the little metal base under the console might be too high for the 02'..And it does leave a little gap.. I personally didn't care cause I thought the gap was negligable considering what I got in return..
You gain two cup holders, a little wider storage bin and a power port in the storage bin so you can keep the phone in there, and a leather/vinyl boot..atleast mine did...I got a GTS..
The one thing that is a slight annoyance since I've done this though is when you have drinks in the cupholder.. it kinda makes it a little wierd to get to the shifter..Ok if you're cruising but if you're in traffic, might get a nnoying..anyhow try it, you may not care...
GDTrumbo said:The odd fitment at the rear of the console is due to the '99+ cars rear suspension design change. These improvements increased the upward suspension travel (reduced bottoming out) but, this also necessitated raising the upper portion of the driveshaft tunnel slightly.
GT
windsordeath said:I have noticed one or two....Don't take me the wrong way..I'm a "Believe it when I see it" kinda guy...Trust me I'm learning new differences between New Edges and SN's everyday..I have both style of car here and a lift..I'm gonna scope it out in the coming weeks..Might help me figure out my plan on the Console...
Still don't understand SXYNERD....Maybe he will chime in?
GDTrumbo said:Oh, It will fit w/o any real problem. Some notice this, some don't. I don't like the way the '98's cupholders are either. Can't blame anyone for trying to improve it. My front cupholder holds a cell phone and that's about it.
Here I am, a guy that has had a few really "raw" musclecars, talking about creature comforts like ..... CUPHOLDERS!
OMG!
GT
GDTrumbo said:The only reason I mentioned the '99+ rear suspension improvements was that I remember reading a magazine artical about the new '99 "New Edge" cars back in mid '98 when I worked for Teksid Alum. Fndry. in Dickson, TN. Since then, I've heard other talk about it on other forums and from other people. Most don't know the change ever took place or really even care.
GT
windsordeath said:GDTrumbo said:The only reason I mentioned the '99+ rear suspension improvements was that I remember reading a magazine artical about the new '99 "New Edge" cars back in mid '98 when I worked for Teksid Alum. Fndry. in Dickson, TN. Since then, I've heard other talk about it on other forums and from other people. Most don't know the change ever took place or really even care.
GT
Yeah I knew about the Control arm length and the Floor board section increased..Not exactly to what extent though..Never had a reason to know other than Just knowing they were different...