Best performance Shift Kit for a 4r70?

[bigkeeko]

Is Transgo up to much? Another option I could have is Performance Automatic. I`m kinda limited to where I can shop. Also what does any of you guys make of this?

http://www.jegs.com/i/B&M/130/40291/10002/-1

Any info appreciated. :thumbsup:

 

[red95r]

Most reliable modification you can with the 4r70, that's doable yourself: Jerry's mod.

I'm going to attempt this later on.

 

[c_me_pass_u]

Same here I would go with the J-Mod

 

[bigkeeko]

Surely a shift kit is a kinda J Mod done for you? ?
Anyways the J mod sounds good but is a bit beyond me I think. Done a bit more research on transmission deep pans. (sounds like a pizza) lol, anyways. Not up to much. Tranny cooler is next I think. Working out the one to buy. Any of you guys bought a tranny cooler recently and been impressed?

 

[c_me_pass_u]

I'm about to buy one by this week because I'm putting a 3500 pi converter so my tranny is gonna be very hot I would highly recommend one because heat is one of the tranny worst enemy

 

[red95r]

your supposed to put them on the end of the outbound line from the cooler in the radiator right? If so where do you locate the tranny rad?

 

[teedub]

Just to chime in I have used the Transgo in and AOD with a 3000 stall for 90,000 miles using a B&M stacker cooler with the Spal fan. I've used a Baumann Engineering in another AOD also. I have an AODE with a Baumann kit and updated servo, mechanical diode and stub shaft with the same stacker cooler. I've had no complaints about either kits reliability and performance. I am really happy with Baumann's customer service.

 

[bigkeeko]

Good to know. being in Europe I`m struggling to get a shipper. LMR won`t ship unless I spend more than $300. I fancied a B&M shift kit or Performance Automatic Shift kit. Looks like I`m limited to a transgo AODE-HD2.

Seems it`ll need to be good enough for me.