chp stroker kit

[staind reality]

OK y'all I'm new to engine building I've never been past basic bolt ons but I want more power and I like torque whic
h I think 347 is great for power across The rpm range correct? What else would I need if I was to buy a 347 striker kit to make the engine run can any of parts be used from the original motor? Which kit u recommend? I can do it over winter cus It wont be driven. Any help is appreciated

 

[staind reality]

Or is precision engine.com a Good place I are they have rebuilt engines in which I really like the sound of the 351w 380 HP 400 Ya for 3100. What else would I need if I was to go that route.

 

[staind reality]

Also like the 331 stroked putting out 340 and 340

 

[ivan12]

I don't have any experience in the stroker field, but what I can tell you is that although the 351w has more room for power you will spend a lot more cash. With the 302 based engine you can re-use your accesories and although not recommended you can reuse your stock heads and intake.

 

[94Snake]

i just did a DSS 347 stroker and reused my stock intake and heads.........it could run a lot better than it does

 

[nicostang]

I don't have any experience in the stroker field, but what I can tell you is that although the 351w has more room for power you will spend a lot more cash. With the 302 based engine you can re-use your accesories and although not recommended you can reuse your stock heads and intake.

+1 on the accessories issue.

ALSO, remember the 351 block is heavier, bigger and TALLER than the 302 block. for a 351 you should use different motor mounts to make you engine sit lower.

It could turn into a big mess that might take a long time to fix

 

[staind reality]

OK thanks the stroker route sounds better

 

[LAFENATU]

I wouldn't rebuild the engine yourself if you arn't familiar with what you are doing. If you do plan on doing it yourself, make sure you have someone with you that can guide you while you do it.

 

[staind reality]

OK thanks for the help I'm wanting around 400 tq and HP so 347 stroked kit with nice heads intake and such would probably get me close then. And ya ill probably get someone to do it or help

 

[ivan12]

Should be close to 400 at the flywheel with a custom cam

 

[Venom351R]

351W Pwns :headbang:

 

[staind reality]

I like 351 also by the way how much do our cars way

 

[Venom351R]

I like 351 also by the way how much do our cars way

you mean weigh? anywhere from 3,400-3,600

 

[staind reality]

OK thanks my phone does that auto word thing

 

[Venom351R]

they will vary somewhat depending on mods but somewhere in that range. Mine is 3,584 with me in it