Clearance issues in the back with new wheels.

[Untame-d]

Here's some pics.

No clearance at all. Less than an inch.

I have Eibach springs and 1 1/4" spacers. Thinking of going back to stock. Or even a coil over. I need to raise it either way with a stiff spring so it doesn't tear my tires up.

What should I go with?

 

[94-427]

The convert for your year has a stifer spings in rear [extra weight] and use stock front springs

 

[Untame-d]

The convert for your year has a stifer spings in rear [extra weight] and use stock front springs

What convert?

The fronts will be staying I want a lower stance in the front.

 

[BruhBrahBrad]

Roll your fenders and keep it movin, that stance is damn near perfect.

 

[BruhBrahBrad]

Maybe try just a 1 inch spacer... It is coming out a skosh too far.

 

[BruhBrahBrad]

Actually no I like it...Tripple post over.

 

[Untame-d]

I need to lift it. It will still hit the rolled fenders.

 

[BruhBrahBrad]

BOOOOOOOOOOOOOOOOOOOOOOO.

 

[Untame-d]

Was also thinking 1" spacers instead of 1 1/4" and roll the fenders. But rolling the fenders is a whole lot of trouble without a roller and I don't want to do all that if it might still hit the fender.

I might have to go all of the above.

1" spacers
roll fenders
stock springs
stiffer shock


s..o..b...

 

[BruhBrahBrad]

Dont do the stock springs PLEASE!!! Do you have Isos or not? If you dont maybe try one on the bottom.

 

[Untame-d]

I'll be checking tomorrow. Then get a set of poly's from americanmuscle if I need some.

 

[JiMi_DRiX]

What size wheel/tire are in the rear anyway?

 

[Untame-d]

275 on 18x10. It's wider than the 275's I had on my 17x9's.

 

[Untame-d]

Took out the 1 1/4" spacers and rolled the fenders abit myself. Took it for a good rip around town and minimal to no issues. This is how it looks:

Not too bad still. I will still be checking and getting poly urethane iso's for the rear though.

 

[BruhBrahBrad]

I think a 1inch would be sufficient, maybe a 3/4

 

[Untame-d]

3/4 would be perfect but I didn't know if they made them a hub centric adapter that thin.

 

[Win]

Yeah check ebay!

 

[JiMi_DRiX]

275's arent quite wide enough for a 10" wheel, are they? I like how the height of the wheel and tire fill the well up though, very nice.

 

[Win]

275's arent quite wide enough for a 10" wheel, are they? I like how the height of the wheel and tire fill the well up though, very nice.

Most D/R's will say a 10" is optimum for a 275 . I know my M&H D/R said 10-11"

 

[vermilion]

have you tried adjustable spring perched lcas? raise it a hair there.