COP conversion

D3VST8R96GT · May 31, 2012

buying his cop harness soon..... not gonng go COP till after my build though .....

vermilion · Jun 22, 2012

Either way it works flawlessly

Sent by smoke signals

FrankenStang · Jun 28, 2012

be carefull about ebay electronics...i got 2 02 sensors and they went bogus after 3 months only...also if im correct you wont see any HP gains from a cop conversion..All it really does is make the engine bay abit cleaner and alot more expenive when its comes time to replace sparkstuff..But honestly,i like the way the coilpacks look and how the wires feed to the sparkplugs..

vermilion · Jun 28, 2012

No different in performance as stated. Personally i didnt like the cluster bomb of wires. I needed a accessible spot for pcv breather. I get COP cheap.

Sent by smoke signals

vermilion · Jun 28, 2012

Nothing ebay about the harness

Sent by smoke signals

vermilion · Jun 28, 2012

I have 32 motorcraft COP

Sent by smoke signals

Gregor185 · Aug 25, 2012

I understand the whole u need cops but can u just get an engine harness out of a 99-04 and do it that way instead?

clark98gt · Aug 26, 2012

No you can't, I actually stripped a harness from a newer mustang 2 days ago to see if I could and most of the wires need changed around. The 96-98 use " waste spark" or something like that and the new edges don't.

metalman302 · Sep 15, 2012

Does the 99+ engine harness connector fit the 96-98 computer harness? I wanted to go this route... Should just be a matter of pulling 4 pins from the connector and splicing those wires to the correct trigger.

D3VST8R96GT · Sep 15, 2012

I have a set of cops I'm waiting for my plug and play harness from the guy on svtp making them

The D3V

Gregor185 · Sep 19, 2012

I got my harness and cops just the other day. Harness looks professional

vermilion · Sep 19, 2012

metalman302 said:
Does the 99+ engine harness connector fit the 96-98 computer harness? I wanted to go this route... Should just be a matter of pulling 4 pins from the connector and splicing those wires to the correct trigger.

no the connector is structurally the same but all most pins are different. you could repin for hours and curse at your wife or dog. you can buy/build the harness and go that route.