Drag wheel owners come on in..

scott5 · Nov 12, 2007

I just picked up a set of draglites for my car, but it came with no center caps and no lug nuts.. I have 15x10 out back and 15x3.5 up front.. they are universal holes.. So my question is what size center caps do you guys have and what are the specs on the lug nuts? I went on summitracing and they have a different couple sizes for both. thanks for the imput

Magic · Nov 13, 2007

This is what you need for the Lugnuts....Ive got the part number memorized after selling countless of these things when I worked for a local speed shop...

McGard wheel nuts part number 63004. (1/2-20 thread pitch, and have the long shank to fit the Weld DragLites and the ProStar wheels)
They are sold in packs of 4, so you will need 5 packs.

Here is the link on Summits website....

http://store.summitracing.com/egnsearch.asp?Ntt=63004&N=700+115+400067&Ntk=KeywordSearch

Magic · Nov 13, 2007

For the centre caps,

use this link.... just measure the Inside Diameter on the wheels...and then click on the appropriate size in the link.....

http://store.summitracing.com/egnsearch.asp?N=700+302038+4294880036+4294774888+115+4294880563

94 DropTop · Nov 19, 2007

dont forget you going to get wheel spacers for the front. I have heard you can get away with 7/16 but i put 1/4in on mine just incase they were wrong.

scarface · Nov 19, 2007

I ran a 1 inch spacer on the front of mine, but thats the cobra brakes. Beware of Summits generic lugs and washers they RUST very fast.

94 DropTop · Nov 19, 2007

ya i got i think the cheap ones on my prostar they have some rust on them but hey i picked up wheels, tire, caps, and lugs for 475 so i cant complain.