hottwheels04
Well-Known Member
- Joined
- Jul 14, 2006
- Messages
- 2,153
- Reaction score
- 13
For sale:
This is a pair of 13'' inch brembo rotors that come with the ford racing brembo pbr cobra brake kits 94-98, I have had these on my car only for a few years , they only have only about 5,000 miles on the rotors still in great almost like new condition -minus the rust on the center area, but will clean up or powder coat or paint them they will look like new, new this kit come from ford racing for $249.00 for the rotors. I will take $90 shipped
New in box "GT" mustang rim center caps I paid $40+ shipping for them.
I will take $25 shipped
I will take $90 shipped Firm.
These are a pair of the stock valve springs that come on the trickflow twisted wedge heads for 87-95 5.0 , maximum lift is .540 valve lift springs new they are around $99 from mustangs unlimited. I will take $40 shipped
I will take $40.00 shipped
Used Take off trickflow street heat intake for 87-95 5.0 mustangs upper intake only $200 shipped
$200 shipped
New never used 94-98 style "cleaner corner" headlights.
$30.00+shipping
Trickflow *hardend pushrods for this setup I had on the stock e7 headed motor, I also have the lifters etc that go with a flat tappet cam setup
$15.00+shipping for the pushrods and *$20.00+shipping for the lifters
$45.00+shipping(+$15 for the pushrods and lifters $20 )+shipping.
stage 1 comp cam flat tappet cam used only 4,000 miles on it
(can also sell stock style hardend pushrods for this setup I had on the stock e7 headed motor, I also have the lifters etc that go with a flat tappet cam setup for extra $) old school lumpy cam idle, and good low end torque.
(*for pre 1986 5.0 liter motors,289,302/351 motors,but can be used in 1987-1995 aswell long as if you go from a roller conversion back to a flat tappet setup like in older 65-85 non roller motors)
$45.00+shipping for the cam
used 19lb injectors for sale for 87-95 5.0 with about 4,000 miles on them was on my old stock 5.0 that was rebuilt
(*the injectors only the maf in picture is already sold attn*)
$25.00+shipping
I will also have in a few weeks once I put my new parts on my 95 gt
as follows all parts used take off condition off my car:
parts as follows:
1994-1995 Ford Racing shorty headers $150 shipped
1994-1995 Basssani Bx X pipe with hi flow cats $175+shipping
1994-1995 Ford Racing 24lb injectors $125+shipping
1994-1995 Pro-m 75mm mass air flow meter for 24lb injectors $150+shipping
or package deal both the injectors and mass air meter for $240 shipped.
Lightning style 90mm mass air meter calibrated for 30lb injectors $100+shipping
stock style 1994-1998 Mustang GT spoiler laser red $50.00+shipping
*Item's Sold As Is*
*Payment will be check or money order pref usps postal money order*
*Item's will be shipped ups or usps*
*Please pm with details zip code shipping may vary on location*
This is a pair of 13'' inch brembo rotors that come with the ford racing brembo pbr cobra brake kits 94-98, I have had these on my car only for a few years , they only have only about 5,000 miles on the rotors still in great almost like new condition -minus the rust on the center area, but will clean up or powder coat or paint them they will look like new, new this kit come from ford racing for $249.00 for the rotors. I will take $90 shipped
New in box "GT" mustang rim center caps I paid $40+ shipping for them.
I will take $25 shipped
I will take $90 shipped Firm.
These are a pair of the stock valve springs that come on the trickflow twisted wedge heads for 87-95 5.0 , maximum lift is .540 valve lift springs new they are around $99 from mustangs unlimited. I will take $40 shipped
I will take $40.00 shipped
Used Take off trickflow street heat intake for 87-95 5.0 mustangs upper intake only $200 shipped
$200 shipped
New never used 94-98 style "cleaner corner" headlights.
$30.00+shipping
Trickflow *hardend pushrods for this setup I had on the stock e7 headed motor, I also have the lifters etc that go with a flat tappet cam setup
$15.00+shipping for the pushrods and *$20.00+shipping for the lifters
$45.00+shipping(+$15 for the pushrods and lifters $20 )+shipping.
stage 1 comp cam flat tappet cam used only 4,000 miles on it
(can also sell stock style hardend pushrods for this setup I had on the stock e7 headed motor, I also have the lifters etc that go with a flat tappet cam setup for extra $) old school lumpy cam idle, and good low end torque.
(*for pre 1986 5.0 liter motors,289,302/351 motors,but can be used in 1987-1995 aswell long as if you go from a roller conversion back to a flat tappet setup like in older 65-85 non roller motors)
$45.00+shipping for the cam
used 19lb injectors for sale for 87-95 5.0 with about 4,000 miles on them was on my old stock 5.0 that was rebuilt
(*the injectors only the maf in picture is already sold attn*)
$25.00+shipping
I will also have in a few weeks once I put my new parts on my 95 gt
as follows all parts used take off condition off my car:
parts as follows:
1994-1995 Ford Racing shorty headers $150 shipped
1994-1995 Basssani Bx X pipe with hi flow cats $175+shipping
1994-1995 Ford Racing 24lb injectors $125+shipping
1994-1995 Pro-m 75mm mass air flow meter for 24lb injectors $150+shipping
or package deal both the injectors and mass air meter for $240 shipped.
Lightning style 90mm mass air meter calibrated for 30lb injectors $100+shipping
stock style 1994-1998 Mustang GT spoiler laser red $50.00+shipping
*Item's Sold As Is*
*Payment will be check or money order pref usps postal money order*
*Item's will be shipped ups or usps*
*Please pm with details zip code shipping may vary on location*