gt40, e303 cam questions???

[attackthesystem]

i just bought a 94 5.0 ho.stock everything.


i bought gt40 heads (not gt40p)
and the e303 cam.
i just need to know if the gt40 heads and e303 cam will fit directly and if not what do i need for them to fit.
and what am i going to need to do for swapping the heads and cam.

anything information helps thank you.

 

[Sinned83]

You will not have issues with fitment. However you will want to upgrade your intake manifold and replace the gaskets of the intake and heads.

 

[attackthesystem]

Alrighty cool.I have all the gaskets for an entire rebuild.
as far as the manifold what intake will i need?

 

[Sinned83]

Depends on your buget. You can go with the gt40 upper and lower or get a trick flow set up. There are tons of products you can go with. Also you might think about upgrading your valve springs.

 

[auto_x5.0]

Find a gt40(explorer/cobra) or used trick flow intake. But remember that with the explorer or TFS intakes you will need the TB elbow

 

[Gtnut1996]

get some lower intake bolts. your factory ones are probally rusted out and break alot of times(the rear two). dont forget coolant, oil, and filter. i got p heads, e cam, and an edelbrock performer 5.0 manifold. i plan to put some 1.7 roller rockers on soon also. the car is a fun budget street car. with the cam you might want to get some gears.with these computers being so picky you might want to tune it.

 

[Win]

LOOK AT MY stuff FS. The TFS intake,elbow and the bbk longtubes would be a great edition to these!!!!!

 

[Farr94gt]

Re: gt40 upper and lower or trickflow trackheat?

i was wondering wich was better.... i am running a stock 94gt but planning on getting a set of trickfolw heads and putting a cam in it...... but was curious which route i should go with the intake??????

 

[auto_x5.0]

If your doing TFS heads, do a TFS intake. TFS makes them to work together, so that would be your best bet. You can pick up a used upper/lower for around $350

 

[Win]

If your doing TFS heads, do a TFS intake. TFS makes them to work together, so that would be your best bet. You can pick up a used upper/lower for around $350

Hence the one i have !!!! $360 Shipped

 

[auto_x5.0]

If your doing TFS heads, do a TFS intake. TFS makes them to work together, so that would be your best bet. You can pick up a used upper/lower for around $350

Hence the one i have !!!! $360 Shipped

Damn man, you're hustlin hard lol

 

[Win]

If your doing TFS heads, do a TFS intake. TFS makes them to work together, so that would be your best bet. You can pick up a used upper/lower for around $350

Hence the one i have !!!! $360 Shipped

Damn man, you're hustlin hard lol

If it doesn't sell im not worried about it. It'll go on the car with a set of gt40's and all the other stuff i have in the Garage