haha she blew up

[joshmartin]

:knuppel2: hahaha she let go on me today after 2 short shots of nitrous @ 125 shots .... i took her for a 3rd try and from a 10mph roll on the et streets she hooked and about ripped me a new one i hit 2nd all was fine pulling hard as shit.... hit 3rd hahaha she spits and sputters for a moment then the car completely dies hahaha :hammer: i get it fired back up and its ticking in the valve train i do beleave and smoking like a mother ****** :buck2: , i drove it back home and oil pressure was fine did a plug check and all looked fine....

but something is hurt somewhere lol so she is going to the local hi performance shop to be tore out next week and going to stick with stock cubes and stock crank , just forged rods n pistons and porting the pi heads , leaving the aftermarket cams that are in it.... and direct port 200 shot here we goooooooooooo :banana: :happydrunks: should be a nasty hoe in about 1 month

 

[voidfinger]

well sorry that it blew man.

 

[Lightning Struck]

so you were expecting it I gather?

 

[joshmartin]

lol well i figured it was a good possibility... had 95k miles and started to get a smoking problem at wot.... and kinda was lookin forward to it... gonna be doing alottttttttttttt of ls1 and cobra asswhoopin when its back together.... hoping for mid 400's to upward 400 numbers on a piss load of spray lol :happydrunks:

 

[94darkhorse]

That sux!

 

[AaRoN]

That really sucks :buck2:

 

[95blackgt54]

That does suck!

Hope it all turns out for you.

 

[joshmartin]

lol its cool .... dont ordered the keith black flat top forged pistons bump the compression to 11.1 and ordered forged probe pistons.... leavin stock crank my friend owns a hi performance mustang shop and has a 700+whp 2 valve and he assured me stock crank is good for 650

 

[MustangMatt96GT]

As long as u didnt bend it. But it sounds just like what I plan on ding after I blow it up on spray.

 

[justinschmidt1]

what a shitty motor

 

[joshmartin]

yeah these cars do have very shity motors lol if i wouldnt of got the car for much of nothin ida never baught it lol :comando:

 

[voidfinger]

i think these are bad ass motors for only like 281 cubic inches... i think it was a shitty motor to blow up so soon though... 95K is nothing on these motors... i got 170k and fine ... "knock on wood"

 

[gt96stang]

Ouch, but at least you knew it was coming.. And it's always nice to upgrade!

 

[Goldmember]

"Gentlemen, we have the technology..." lol

Bring it back in badass form!

I'm almost at 100K and doing fine other than the timing chain slappin around.

 

[joshmartin]

hasnt been 24 hours and the forged bottom end is in the mail allready :happydrunks: cheers to my expensive habbit lol imp:

 

[MustangMatt96GT]

hasnt been 24 hours and the forged bottom end is in the mail allready :happydrunks: cheers to my expensive habbit lol imp:

'
i call it my drug

 

[justinschmidt1]

"Gentlemen, we have the technology..." lol

Bring it back in badass form!

I'm almost at 100K and doing fine other than the timing chain slappin around.

How do you know your timing chain is slapping around?

 

[d98gt]

I have way more miles and my car is still rolling

 

[joshmartin]

my car had a full pi swap aftermarket cams regular bolt ons and the 125 shot... and i wasnt nice to this thing at all lol :slap:

 

[Jrgunn5150]

my car had a full pi swap aftermarket cams regular bolt ons and the 125 shot... and i wasnt nice to this thing at all lol :slap:

Exactly, with a 7k rev limiter and running on pray, probably as carefully as you set your rev limiter, how can you call it a shitty motor?