muscle2000
New Member
Hello SN95Forums I hope I am posting this is the correct section, I am new to this site as you can see from my Profile and very happy to be here. Anyways I am interested in throwing in the Bada$$ 2V TS1000-99-INT Kenne Bell Supercharger that allows for 6-14PSI including the Intercooler. I have a few concerns before I attempt to perform this and I know on this forum there have been many people that have already done a build just like this or similar.
Ok so as of right now my Current build is pretty stock the car is a 2000 Mustang GT 4.6L with 137,000 miles on it. Mods are JLT RAM Air Intake, SCT Tuner, 70 MM TB, yes very little mods this thing is a daily driver and my only car. I have been doing some research on putting the Kenne Bell in my car and these are the things I am going to change before I put it in. I need to switch out the A/C compressor because it has cracked and summer's in Sacramento, CA are usually 100 plus degrees daily and by night 90 degrees, that has nothing to do with the KB but it needs to be done. Next is switch out the stock motorcraft spark plugs for NGK T6's and test the Motor Compression, MSD Spark Plug wires for the stock wires, possibly the fuel pump I am still looking for a good affordable one and then input the KB.
My Question's / Concerns are this is a daily driver, it does have 137,000 miles on it with no serious problems that I know of. Will my car be able to handle the KB with 6-14PSI Intercooled? With normal driving will the gas mileage change? What is the average cost for installation because I can only find one shop in Sacramento California and they quoted me 1,500 for labor only DAMN, I am looking for someone to install this because I know very little about cars and never installed anything large like this besides the small mods I posted. Do I need gauges? Can I run the A/C and heater like I normally do? I do understand non of these question's can be answered 100% because no one here has seen my engines health, Several other variations come in to play like how hard I drive the car, etc, etc. I am just looking for suggestion's, Advice and other people's experiences with a supercharger. Also if anyone knows of any affordable car mechanics that can install this in Sacramento, Roseville, Folsom, GB, Rancho, California that would be great.
Thank you SN95Forums in advance for the help!!
Ok so as of right now my Current build is pretty stock the car is a 2000 Mustang GT 4.6L with 137,000 miles on it. Mods are JLT RAM Air Intake, SCT Tuner, 70 MM TB, yes very little mods this thing is a daily driver and my only car. I have been doing some research on putting the Kenne Bell in my car and these are the things I am going to change before I put it in. I need to switch out the A/C compressor because it has cracked and summer's in Sacramento, CA are usually 100 plus degrees daily and by night 90 degrees, that has nothing to do with the KB but it needs to be done. Next is switch out the stock motorcraft spark plugs for NGK T6's and test the Motor Compression, MSD Spark Plug wires for the stock wires, possibly the fuel pump I am still looking for a good affordable one and then input the KB.
My Question's / Concerns are this is a daily driver, it does have 137,000 miles on it with no serious problems that I know of. Will my car be able to handle the KB with 6-14PSI Intercooled? With normal driving will the gas mileage change? What is the average cost for installation because I can only find one shop in Sacramento California and they quoted me 1,500 for labor only DAMN, I am looking for someone to install this because I know very little about cars and never installed anything large like this besides the small mods I posted. Do I need gauges? Can I run the A/C and heater like I normally do? I do understand non of these question's can be answered 100% because no one here has seen my engines health, Several other variations come in to play like how hard I drive the car, etc, etc. I am just looking for suggestion's, Advice and other people's experiences with a supercharger. Also if anyone knows of any affordable car mechanics that can install this in Sacramento, Roseville, Folsom, GB, Rancho, California that would be great.
Thank you SN95Forums in advance for the help!!