MustangMatt96GT's Race Car Build

[MustangMatt96GT]

351W street car, in my 1996 Mustang GT. Car has been 10.40s@ 127 mph here at this altitude.

New goal, 9.50's at this altitude while still being able to street drive it. Car has a blower bolted on now. Just do not have a Blow through carb yet, or a fuel system to support it.

here is a start up video.

Novi 2000 efi renegade setup - YouTube

The rest of the parts to finish will be ordered tuesday, and hopefully some dyno time towards the end of this month. Healthy little street car!!

Some new swag too... Both related to X275 racing class... what im building the car towards now.

All the fuel parts have been ordered, other than the carb! Should be getting close!!! Also should NEVER have to put a new system in the car.

-8 Feed line, -10 Return line, Aeromotive boost reference regulator 13202, MagnaFuel 4303 pump ( 2000 hp EFI pump). I will get the pressure down from the pump using the bypass regulator...

Should be interesting!

Update as parts come in!

 

[MustangChris]

not even a text...


all i got to do tonight was mess up my battery box... i see how it is.

 

[MustangMatt96GT]

This was on the other day when you were texting me.... When the fuel parts show up, and I start working on it, ill text ya!

 

[5.0kid]

awesome project. 10.4 would have been fast enough for me lol

 

[MustangChris]

haha. sweet.

i'd invite you over, but a soldering gun is a one man job. and the heater hoses are 24 hours away from a visit from the scissors. lol. then the damn thing is pretty much done. lol.

 

[MustangChris]

also, i refuse to work with mikey... he keeps touching my butt and stuff.. .. .


anyways im a pro at dropping a sn fuel tank and making AN lines...

 

[boosted93]

LOL at the video!! What motor are you running??

 

[MustangMatt96GT]

also, i refuse to work with mikey... he keeps touching my butt and stuff.. .. .


anyways im a pro at dropping a sn fuel tank and making AN lines...

Mikey helped me bolt the Novi on... he didnt touch my butt.... I feel unloved!

The car has a fuel cell in it, so its simple to do this stuff, and the AN lines are the black nylon braided line instead of steel, so they are even easier!

The car has a 360 cubic inch small block on a 9.5 inch deck 1969 block... Calculated to go 9.90s at this altitude I need roughly 620 RWHP. To go 9.50s 800 or so. We shall see...

 

[fastbanshee1999]

Man, that car is all sorts of nasty. Lol love the vid and watched a bunch of others on your channel!

 

[g36 monkey]

Much more impressive for a street car to run a 10 than a trailer queen. I always loved the idea of driving to the track, running a 10, and driving home. I doubt I'll ever have the funds to build such a car, but I love it.


Very nice clean build man!

 

[mygreengt]

damn! your in denver arent you?

 

[MustangChris]

we do things right 'round deese parts...

 

[vermilion]

I dig it.

 

[MustangMatt96GT]

Sure doesn't Look like the total I spent on these bad boys... But here is all the lines and fittings for the fuel system!

CSU carb was ordered today. Prolly take 2-3 weeks for that to show up though. Just a matter of waiting for all the parts to show up now. Everything but a datalogger and a Radiator Fan setup has been ordered.

The BeCool Radiator will be here tuesday. Procharger Red BOV might be here tomorrow. The carb hat and spacer has a possibility too.

I want the carb hat and the spacer here so I can cut my hood the way I need to to make it fit.

Yes I am in Denver...

 

[mikey94gt]

also, i refuse to work with mikey... he keeps touching my butt and stuff.. .. .


anyways im a pro at dropping a sn fuel tank and making AN lines...

Ya, makes your GF all jealous and stuff.... lol

 

[MustangChris]

lol. how's your bucket of crap coming along?

 

[mikey94gt]

Still a bucket of crap, but its assembled..... Scott and I are trying to get the chip thing worked out, and I'm looking into alternative means of fuel delivery.

 

[MustangMatt96GT]

Tried to go buy a tig welder today. Been on the list for a long time, nobody had them in stock. Definatly would have multiple uses for a tig!

So I gotta wait til I hear from my friend that has a real nice tig setup.

 

[MustangChris]

thought about calling scott for a basic tune so i can drive it to the dyno instead of towing it... he'll do ya good.

and a tig would be sweet. we've had to weld so much crap on my car, i wont start another project until i learn how... even my battery bracket needed lengthening... good job moroso.

 

[MustangMatt96GT]

Boost gauge is in. The discharge piping is being welded as of right now at my buddy's house.

Just gotta wait for more parts to show up...