My friend wants to sell me his nitrous kit for 450. Its the base NX wet kit /w a bottle warmer and purge kit. All brand new ****. I don''t know **** about nitrous but what else would i need/should get to be safe. I was thinking a 75 shot. Stock bottom end with 75k on it and i have the pi swap. I think i may need a bigger fuel pump and i''d get a retune on my car which is like 175 so not worried there. I just don''t know **** about hooking up the electronics/jets/installation of the kit. Is it hard? Will the motor be alright? Hows the compression effect? Anything you guys can let me know or help with will be much appriciated like i swaid i dont know much about it just that its a steal compared to buying it new.
Also what other parts of the car will be needing to be beefed up if anything. I was thinking about buying a rebuilt t-45 from hanlon or maybe a reman t3650(not sure what is needed to swap, sensor wise), what clutch would be good, also alum flywheel? Sorry for all the ?''s It''s just i need a new trans/clutch and might as well know what ill need ahead of time. Also the car will have 4.10''s.
Also what other parts of the car will be needing to be beefed up if anything. I was thinking about buying a rebuilt t-45 from hanlon or maybe a reman t3650(not sure what is needed to swap, sensor wise), what clutch would be good, also alum flywheel? Sorry for all the ?''s It''s just i need a new trans/clutch and might as well know what ill need ahead of time. Also the car will have 4.10''s.