Need some advice for mods

[Gregsn95]

I have a stock 1995 gt and want some advice on what to do first. Any ideas? For reasonable prices

 

[danielson631]

whats your goals with the car? do you want it to look good or be fast? or both

either way, to start id say

intake and exhaust
rims and lowering springs
gears and sticky tires

not saying in that particular order

then nitrous would be the best bang for your buck if you want to go fast.



if your looking for reasonable prices, id think about buyin a lot of your parts used, if you dont mind buying used products, that are in good condition of coarse. thats what i try to do atleast cause im always on a budget

 

[Javi]

1.-Gears
2.-Exhaust
3.-Bolt-ons
4.-Smoked headlights
5.-Bullitts

:grin:

 

[MustangMoser]

gears, full exhaust, cai, lowering springs, rolling stock. all depends on what you want, gears will give you the most seat of your pants besides a power adder (n20, boost)

 

[LAFENATU]

Gears, Gears, Gears

3.73's imo.

An easier way of figuring out what you want is, how much money do you have to play with? :dontknow:

 

[427danderson]

gears are numero uno in my opinion... I went from stock 3.08's to 3.73's and WOW put a smile on my face!

 

[nicostang]

stock 94-95 are 3.08 or 3.27? i had a feeling they were 3.27s while foxes had 3.08, am i right or wrong?

 

[danielson631]

ive been waiting to get gears installed for a while now.

deff one of the first things i should have done.
the gears themselves are cheap, about $150, but install would run $300-400

i want to do them myself but something are better left to the pros

 

[427danderson]

mine were 3.08's... I have the basic gt w/ a T5 cloth... aka no options but it's fun!

 

[427danderson]

I was in the same boat I had them for a calender year before I gave up my dream of installing gears, diff, and all bearings... got a deal from Dean's Performance in St. Charles, IL though definitly will be going back for other big stuff...

 

[rz5.0]

my has 2.73 stock wich i like going 80 at 2k

 

[CanaryGT]

Im a 4.10 fan here. But yeah, gears. I like exhaust ect. Also, SFC or LCA is always nice.

 

[orodi]

I would first decide what you want to do with the car. Then start with the small stuff. C.A.I., exhaust, TB, etc. Then i would save for a good heads, cam, intake setup. Keep some money laying around for a tune as most 94-95 computers do not react well with new go fast parts on there.

 

[Paul]

Gears.

 

[RockstarMentality]

what do you want out of it? since by now u probly got the "gears and exhaust", ima say some rollers wrapped in sticky rubber. your car is only as capable as your tire

 

[427danderson]

hahahaha new tires come after the gears... cause you need em! lol

but definitely a good point!